Viimeaikaiset hankinnat VTT Technical Research Centre of Finland Ltd
2026-03-17Employee Engagement Survey Services (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is to find a service provider for Employee Engagement Survey Services (later “Service”). VTT is looking for a service provider, who will provide a scientifically validated survey model, modern and user-friendly online platform for the survey, conduct the engagement survey, and provide an in-depth analysis and insights into the results demonstrating a thorough understanding of employee engagement and conducting engagement surveys. VTT is looking for a one-stop service, so …
Näytä hankinnat »
2026-02-18Kelvin probe force microscopy (KPFM) (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is a Kelvin probe force microscopy (KPFM) equipped with atomic force microscopy (AFM) functionality, a state-of-the-art detector system, and equipment for advanced material surface potential mapping with an efficient spatial resolution and a minimum of topographical artifacts (later also “Equipment”). The equipment should support both AM- and FM-KPFM modes, operate with a potential range up to ±10 V, with a reasonable spatial resolution. The applied voltage should be from …
Näytä hankinnat »
2025-11-28200 mm wafer coating and developing track tool DUV (VTT Technical Research Centre of Finland Ltd)
THE OBJECT OF THE TENDER PROCESS The object of the procurement is 200 mm wafer coating and developing track tool for VTT Micronova cleanroom semiconductor front end processing. The procurement involves a tool integrated into a DUV exposure tool, but also capable of developing wafers from the i-line stepper in the same facility. The tool features open cassette loading stations, spin coating and developing stations and hot and cool plates, and a module for integration with the DUV exposure tool. The tool …
Näytä hankinnat »
2025-10-17Semi-Automatic Wafer Grinder (VTT Technical Research Centre of Finland Ltd)
The object of the tender is a Semi-Automatic Wafer Grinder with manual wafer loading and unloading on the chuck table (later also “Equipment”), capable of thinning Si, SiC, LiNbO3 and other typical semi-conducting wafers of 200 and 300 mm diameter to varying thicknesses with end-point control, TTV profile control, capability to thin wafers down to 10um thickness with supporting tape and capability to grind only a determined distance from edge-to-center. Equipment must be new. The tool must comply with …
Näytä hankinnat »
2025-06-25CARBONIZATION AND ACTIVATION UNIT (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is a carbonization and activation unit. Continuously fed electrically heated rotary kiln carbonization and activation unit built into a sea container. The unit is suitable for both carbonization and activation with maximum temperature at least 900 degrees Celsius. Activation should be possible with both steam and CO2. Full system including continuous feeding and cooled product removal. The preliminary budget for the whole system is 285 000 euros (VAT 0 %). Within the …
Näytä hankinnat »
2025-05-16200 mm coating and developing track tool (VTT Technical Research Centre of Finland Ltd)
THE OBJECT OF THE TENDER PROCESS The object of the tender process is 200 mm coating and developing track tool (later also “track tool” or “Tool”) for the VTT Micronova cleanroom semiconductor front end. The procurement involves a single cassette-to cassette tool with spin coating and developing stations and hot and cool plates. The coating and developing track tool is intended to support silicon semiconductor front end processing of 200 mm wafers, facilitating exposure by stepper or automated mask …
Näytä hankinnat »
2025-05-09Market data platform for managing and sharing market data (SaaS) (VTT Technical Research Centre of Finland Ltd)
BACKGROUND INFORMATION VTT is a visionary research, development, and innovation partner for companies and society and one of Europe’s leading research institutes. Its mission is to create a positive impact on life and the planet. VTT focuses not only on technological advancements but also on their practical application to benefit people and to build a better future for generations to come. The sharing market and other comparable information is essential for VTT to monitor and comprehend its operating …
Näytä hankinnat »
2025-03-28200 mm coating and developing track tool (VTT Technical Research Centre of Finland Ltd)
THE OBJECT OF THE TENDER PROCESS The object of the tender process is 200 mm coating and developing track tool (later also “track tool” or “Tool”) for the VTT Micronova cleanroom semiconductor front end. The procurement involves a single cassette-to cassette tool with spin coating and developing stations and hot and cool plates. The coating and developing track tool is intended to support silicon semiconductor front end processing of 200 mm wafers, facilitating exposure by stepper or automated mask …
Näytä hankinnat »
2025-03-20PILOT LINE WIDEBAND NETWORK ANALYZER 0-110 GHz (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is a vector network analyzer that is capable to measure 4-port S-parameters at least up to 26 GHz and 2-port S-parameters with extenders up to 110 GHz. It is assumed that the equipment consists of a base unit (vector network analyzer up to at least 26 GHz), a possible controller unit, and extender units for 110 GHz operation. The main use for the equipment is for on-wafer measurements of active and passive devices and circuits, such as resonators, filters, transmission …
Näytä hankinnat »
2025-02-21CARBONIZATION AND ACTIVATION UNIT (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is a carbonization and activation unit. Continuously fed carbonization and activation unit built into a sea container. The preferred pyrolysis technology is a rotating kiln. The unit is suitable for both carbonization and activation with maximum temperature at least 900 degrees Celsius. Activation should be possible with both steam and CO2. Full system including continuous feeding and cooled product removal. The preliminary budget for the whole system is 285 000 euros …
Näytä hankinnat »
2025-01-13Multimaterial pilot scale shredder (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is pilot scale shredder for plastic and textile waste output of 200-800 kilos per hour (later also “Equipment”). Adjustable output size minimum 20mmx20mm for textile. Otherwise output material size 20x20 mm – 60x60 mm and the range can be wider. The equipment will be used in research projects mainly in plastic and textile waste recycling research. The purpose is to have one suitable equipment for rigid and flexible plastic waste and textile waste. The equipment will be …
Näytä hankinnat »
2024-12-19Single wafer plasma asher tool (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is Single wafer plasma asher tool (later also “Equipment”). The procurement object is a new 200 mm Single Wafer Plasma asher tool for the VTT Micronova cleanroom semiconductor front end. The procurement includes a process chamber for Polymer Removal and PR ash. The single-wafer plasma asher tool is for silicon semiconductor front-end, the tool must be compatible with industry-standard cleanroom requirements, including automated wafer handling, welded gas lines with …
Näytä hankinnat »
2024-11-25FULLY AUTOMATIC OFFLINE SCREEN PRINTER (VTT Technical Research Centre of Finland Ltd)
1. Description of the equipment Large area offline automatic printing machine. High accuracy and high repeatability camera alignment screen printer for thick film printing in research and industrial grade. Main applications wearable electronics, flexible electronics, stretchable electronics and rigid LTCC electronics printing. Multilayer printing of various conductors and dielectrics and through hole vias with high accuracy is a must. Installed in clean room with medical grade production environment. The …
Näytä hankinnat »
2024-11-014-port network analyzer (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is 4-port vector network analyzer that is capable to measure S-parameters at least up to 110 GHz frequencies with single-sweep. It is assumed that the equipment consists of a base unit (vector network analyzer up to xx GHz), a possible controller unit, and extender units. The main use for the equipment is for on-wafer measurements of active devices and circuits, such as low-noise amplifiers, transistors, diodes, and mixers. The extender units will be mounted on existing …
Näytä hankinnat »
2024-08-15Continuous slurry hydroprocessing miniplant (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is a Continuous Slurry Hydroprocessing Miniplant. The equipment will be used for catalytic hydroprocessing of biomass and waste in continuously stirred tank reactor (CSTR) mode. Reactor part will comprise two 200-300 ml Hastelloy autoclaves working as CSTR reactors in series followed by the separation section for high and low pressure separations. CSTR plant shall be operable under pressures up to 200 bar and temperatures up to 450 °C. Continuous feed of liquid feed and …
Näytä hankinnat »
2024-07-12Stylus profilometer (VTT Technical Research Centre of Finland Ltd)
THE OBJECT OF THE TENDER PROCESS The object of the tender process is a Stylus Profilometer for both 200 mm- and 300 mm wafers. The equipment will be used in VTT's microelectronics cleanroom located in Tekniikantie 17 Espoo Finland (VTT's Micronova center for applied micro and nanotechnology). For further information, see https://www.vttresearch.com/en. The tool must be capable of measuring 200- and 300 mm single side polished (SSP), double side polished (DSP)- and SOI silicon wafers as well as glass and …
Näytä hankinnat »
2024-07-11Synthetic genes and DNA fragments (VTT Technical Research Centre of Finland Ltd)
The object of the tender process are synthetic genes and DNA fragments (later also "Supplies"). The object of the tender process and requirements relating to the supplies are discussed in more detail in the invitation to tender documents. The objective is to find professional suppliers that can guarantee a high standard of quality and who is capable of providing the Supplies in its entirety. The objective is to find professional suppliers that can guarantee a high standard of quality and who is capable …
Näytä hankinnat » Mainitut toimittajat:GenScript Biotech Netherlands BVLife Technologies
2024-06-28U-Space Finland – Precommercial pilot implementation (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is to award a single contract to a supplier that can provide the licenses for a precommercial U-Space system application and hosting in cloud environment (SaaS) (later also “Service”). VTT aims to purchase 25 simultaneous per-user licenses with an option to purchase perpetual and/or additional licenses in the future. All operators of Unmanned Aircraft Systems (UAS) in the U-Space airspace are required to purchase the following services: - UAS flight authorization service, …
Näytä hankinnat »
2024-05-20POLYMER DIRECT WRITING SYSTEM (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is a Polymer direct writing system (later also “Equipment”). VTT requires a polymer direct writing system for production of micron scale optical lenses, and other microscopic optical and mechanical structures. The offer must include all hardware and software necessary to fabricate micron scale optical elements. The main design wavelength region for optical elements is 1200 - 1600 nm, hereafter referred to as “wavelength operation region”. The object of the tender process …
Näytä hankinnat »
2024-04-12Silicon wafers (VTT Technical Research Centre of Finland Ltd)
The object of this tender process are silicon wafers. Silicon wafers are used in VTT Technical Research Centre of Finland Ltd’s (Later “VTT”) Micronova cleanroom, which is located in Otaniemi Technology Campus, Espoo, Finland. Micronova is Finland's National Research Infrastructure for micro- and nanotechnology, jointly run by VTT and Aalto University (http://www.micronova.fi). With this tender process, VTT is searching for the framework suppliers with capability to provide silicon wafers for VTT's …
Näytä hankinnat »
2024-01-22MULTICHANNEL SNSPD DETECTION UNITS (VTT Technical Research Centre of Finland Ltd)
The objects of the tender process are two Multichannel superconducting nanowire single-photon detector (SNSPD) units. Superconducting nanowire single photon detectors are used in detection of near-infrared light at single photon level with high detection efficiency (>70%) and high repetition rates (>1 MCps). The object of the tender process is described in more detail in the invitation to tender documents.
Näytä hankinnat »
2023-12-22Twin screw extruder for food R&D purposes (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is a twin-screw extruder with a cooling die for food R&D purposes with screw diameter between 16 – 20 mm (later also “Equipment” or “Extruder”). The extruder will be an addition to the food pilot processing facility at Tekniikantie 21, Espoo, Finland. VTT Technical Research Centre Ltd (later “VTT”) creates innovative technologies for appealing, healthy and safe plant-based ingredients and foods. VTT will use the extruder in the development of meat analogs by high-moisture …
Näytä hankinnat »
2023-11-01Wet benches (VTT Technical Research Centre of Finland Ltd)
The object of the tender is manually operated wet process benches ( 10 benches in total ) for front end processing in VTT Micronova cleanroom. The tenderer should offer each of the wet benches 1-10, partial tenders will not be accepted. The cleanroom classification is ISO 4…ISO 6 (10…1000). The total area of the cleanroom is 2 600 m2, and there is an installed equipment base of 200 processing and measurement tools. The current main wafer size is 150 mm, but the equipment will gradually be renewed or …
Näytä hankinnat »
2023-10-05Automatic UV-laser system (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is automatic UV-laser system for electronic manufacturing of Medical, Aerospace, Research etc. Applications (later also “Equipment”). Main functions are cutting, laser ablation and drilling organic and inorganic heat sensitive substrates (LTCC green sheets, Sintered Ceramics, Plastics: PI, PET, PC, TPU, Metal sheets and paper, with minimal heat affected zone. Material thickness from 25 µm up to 8 mm focus height. Laser ablation is used for QR code marking and metal layer …
Näytä hankinnat »
2023-08-17Triple quadrupole mass spectrometer, ICP-MS/MS (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is Triple quadrupole mass spectrometer ICP-MS/MS.
Basic use of a mass spectrometer is to analyze element concentrations in a sample based on the mass-to-charge ratios of the ionized elements. There are several different types of mass-spectrometers available that differ in methods of sample introduction and analysis type. The required mass spectrometer in this procurement is a triple quadrupole mass spectrometer: ICP-MS/MS
The intended use of the triple quadrupole mass …
Näytä hankinnat » Mainitut toimittajat:Agilent Technologies Finland Oy
2023-05-26Plating (Cu, TSV, UBM) (VTT Technical Research Centre of Finland Ltd)
The object of the tender is an an electroplating tool (later also “Equipment”), which can electroplate metallic copper films for use as electrically conducting lines and vias onto 150- and 200 mm silicon wafers typical of the semiconductor industry.
The reference price ("the total price") will consist of the price for the equipment in required minimum configuration described in Annex 1. The optional features are not included in the total price of the equipment.
The object of the tender process is …
Näytä hankinnat » Mainitut toimittajat:MPE Nordic AB
2023-05-17Si & Silicon oxide CMP (VTT Technical Research Centre of Finland Ltd)
The object of the tender is an Automatic Chemical Mechanical Polisher (later also “Equipment”), for the polishing of typical films and substrates like Si, Si-compounds, Ge and other typical wafers used in semiconductor industry of 100, 150 and 200mm diameter. The equipment shall be designed with at least two polishing platens with integrated in-situ capable pad conditioning systems, an end-point detection on at least one platen, multi-zone carrier heads for all wafer diameters and a slurry feed system …
Näytä hankinnat » Mainitut toimittajat:S3-Alliance Ltd
2023-05-16Plasma ALD (VTT Technical Research Centre of Finland Ltd)
The object of the tender is a 2-chamber Plasma Enhanced Atomic Layer Deposition Cluster with Automatic Wafer Handling (later also “Equipment” and/or "Tool") for coating of 200mm wafer substrates, or substrates that can be placed on such carrier wafers, with different metals, nitrides and oxides with process separation between metals/nitrides and oxides, and wafer handling from chamber-to-chamber and chamber-to-cassette without vacuum breaking.
The object of the tender process is described in more detail …
Näytä hankinnat » Mainitut toimittajat:Veeco GmbH
2023-04-13PORTABLE DRY 1-KELVIN CRYO-REFRIGERATOR (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is Portable dry cryo-refrigerator capable of a base temperature of 1 degree Kelvin or below.
The purpose of use of the equipment is a customisable cryogenic environment for multiproject use. The equipment will be located in a standard laboratory environment with cooling water supply. The laboratory has also electric power, N2, and pressured air connections available.
The object of the tender process is described in more detail in the invitation to tender documents.
Näytä hankinnat » Mainitut toimittajat:Entropy GmbH
2023-04-05AUTOMATIC WAFER GRINDER (VTT Technical Research Centre of Finland Ltd)
The object of the tender is an Automatic Wafer Grinder, capable of thinning Si and SiC, LiNbO3 wafers of 100, 150 and 200mm diameter to varying thicknesses with end-point control, cassette-to-cassette processing, TTV profile control and capability to handle thin wafers 100um thick supported by tape and grind away bonded wafer stacks to within 3 um of a typical interface.
The object of the tender process is described in more detail in the invitation to tender documents.
Näytä hankinnat » Mainitut toimittajat:DISCO HI-TEC EUROPE GmbH
2023-02-24i-line STEPPER for nanofabrication processes (VTT Technical Research Centre of Finland Ltd)
VTT is looking to acquire a new or a pre-owned projection exposure system for photolithographic processes in the i-line bandwidth. This exposure system will be further called wafer “stepper”. The system of interest has the lens with property of image reduction in ratio of 1:5 or 1:4. The stepper has to be fully automated and capable of processing 150mm and 200mm ø substrates. The type of wafers the tool should be able to process are described further. The tool should be of cleanliness class 1 of the SEMI …
Näytä hankinnat »
2023-02-23SEMIAUTOMATIC PROBE STATION, WITH 300 MM WAFER CHUCK (VTT Technical Research Centre of Finland Ltd)
VTT is looking to semiautomatic probe station for measuring wafers up to 300mm, with heating and cooling capability.
The object of the tender process is “Clean room compatible probe station for low current measurement for wafers up to 300 mm” (later also “Equipment”). The probe station’s primary use is room temperature semi-automated DC- and RF-characterisation (<20 GHz) of electrical components, that can be light sensitive, on single dies (5 mm x 5 mm), 150 mm, 200 mm, or 300 mm wafers. The equipment …
Näytä hankinnat » Mainitut toimittajat:Signal Solutions Nordic Oy
2023-02-22VTT Design services (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is design services as described in the contract notice, invitation to participate, and its annexes.
We seek partners able to help us with the following objects of procurement:
Object 1: Design driven innovation for VTT research projects
Object 2: Design for VTT process innovation and offering development
Object 3: Design for VTT Digital Customer Experience
Based on VTT’s needs during the contract period, VTT will order separate design service projects that will be related …
Näytä hankinnat » Mainitut toimittajat:Accenture OyDigitalist Finland OyGofore OyjNordkapp Creative OySolita Oy
2023-02-13DILUTION REFRIDGERATOR (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is Dilution refridgerator (later also “Equipment”). The dilution refrigerator primary use is to be a customisable cryogenic environment for multiproject use. The equipment will be located in a standard laboratory environment with cooling water supply. The laboratory has also electric power, N2, and pressured air connections available.
The technical specification of the equipment to be supplied is discussed in more detail in Annex 1 (Description and technical …
Näytä hankinnat » Mainitut toimittajat:Oxford Instruments GmbH
2022-10-14PARTICLE MEASUREMENT TOOL (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is Particle measurement tool (later “equipment” or “tool”). The equipment will be installed in the Micronova facility in Espoo, which is jointly used by VTT Technical Research Centre of Finland Ltd. (VTT) and Aalto University for research, development and small-volume production. The cleanroom classification is ISO 4…ISO 6 (10…1000). The total area of the cleanroom is 2 600 m2, and there is an installed equipment base of 200 processing and measurement tools.
The basic use …
Näytä hankinnat » Mainitut toimittajat:KLA Corporation
2022-10-07A combined focused-ion beam / scanning electron microscope FIB-SEM (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is a combined focused-ion beam / scanning electron microscope (FIB-SEM) equipped with field-emission gun (FEG) electron source, state-of-the-art detector system, and equipment suitable for materials in-situ testing inside the microscope chamber (later also “Equipment”).
A combined focused-ion beam / scanning electron microscope (FIB-SEM) equipped with field-emission gun (FEG) electron source, state-of-the-art detector system, and equipment suitable for materials in-situ …
Näytä hankinnat » Mainitut toimittajat:Finfocus Oy
2022-08-31DILUTION REFRIDGERATOR (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is Dilution refridgerator (later also “Equipment”). The equipment is used to cooldown scientific samples and devices to low temperatures, down to 20 mK.
The object of the tender process is described in more detail in the invitation to tender documents.
Näytä hankinnat »
2022-06-16OXIDATION, SINTERING, AND ANNEALING FURNACES (VTT Technical Research Centre of Finland Ltd)
The object of the procurement is an Atmospheric Oxidation, Sintering, Annealing furnace stack (4 tubes) for the VTT Micronova cleanroom front end (later “equipment”) will be installed in the Micronova facility in Espoo, which is jointly used by VTT Technical Research Centre of Finland Ltd (VTT) and Aalto University for research, development and small-volume production of semiconductor devices. The cleanroom classification is ISO 4…ISO 6 (10…1000). The total area of the cleanroom is 2 600 m2, and there is …
Näytä hankinnat » Mainitut toimittajat:Tempress Systems BV
2022-04-27SUB MICRON ACCURAY FLIP CHIP DIE BONDE FOR RESEARCH AND SMALL VOLUME PRODUCTION (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is a manual of semiautomatic flip chip die bonder with high placement accuracy and flexibility to different bonding technologies (later also “Equipment”). Main use is research and low volume bonding. Bonder must be able to handle wide scale of different chip sizes and capability to accurately control bond force. Accuracy should targeted below 1 um and advanced alignment features are key parameters. Besides of normal pad alignment also alignment to features around bonded …
Näytä hankinnat » Mainitut toimittajat:Finetech GmbH and Co.KG
2022-04-08Consultancy support for EU-Proposal Preparation (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is consulting services (later also “Service”) for the preparation of grant applications for EU funds and programmes (most notably Horizon Europe), in which VTT is the coordinator of the consortium of applicants.
The object of this tender process is selected proposals only. The total estimated number of coordinated assignments is about up to 4-5 annually.
The object of the tender process is described in more detail in the procurement documents documents, see for example …
Näytä hankinnat » Mainitut toimittajat:Civitta International OÜERINN Innovation Ltd
2022-04-01TWIN SCREW COMPOUNDER (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is a twin screw compounder.
VTT is looking for a Twin-screw extruder line for thermoplastic compounding (max. 20 mm screw diameter) to VTT Polymer Pilot in Tampere, Finland.
The object of the tender process is described in more detail in the invitation to tender documents.
Näytä hankinnat » Mainitut toimittajat:Leistritz Extrusionstechnik GmbH
2022-03-17Data Management System for VTT Industrial Biotechnology Research Facility (VTT Technical Research Centre of Finland Ltd)
The object of the procurement is a system for the management of files created and data measured by instruments, hereafter “data management system” and “System”. The procurement covers the following parts:
1. licenses for the System,
2. an implementation of the System (implementation project and extensions to the system), and
3. support and maintenance services.
The object of the tender process is described in more detail in the invitation to tender documents.
Näytä hankinnat » Mainitut toimittajat:Oy Fision Ltd
2022-03-01Photomasks (VTT Technical Research Centre of Finland Ltd)
VTT Technical Research Centre of Finland Ltd (hereinafter “VTT”) is using photomasks for research projects and in a small-scale production needs. The photomasks are used in Micronova cleanroom, located in Espoo, Finland (http://www.micronova.fi). The cleanroom is equipped with standard semiconductor industry process equipment including Canon FPA3000-i4 5x wafer stepper and three (3) mask aligners. End products are for example active silicon devices, radiation detectors, MEMS devices and various thin film …
Näytä hankinnat » Mainitut toimittajat:Compugraphics International Ltd
2022-02-10Virtual / Digital Human-led Coaching (VTT Technical Research Centre of Finland Ltd)
The object of the procurement is virtual human-led coaching for VTT’s leaders and employees.
The coaching is implemented online to VTT’s employees located in different locations in Finland. The length of each coaching process can be from 3 to 12 months and can cover a variety of topics. Most common topic has previously been leadership skills and this trend is likely to continue. The service provider must be able to offer coaching for leadership skills.
The coaching must be available in Finnish and in …
Näytä hankinnat » Mainitut toimittajat:CoachHub GmbH
2022-02-03Plasma Etcher for Metals (VTT Technical Research Centre of Finland Ltd)
The object of the tender process is plasma etcher for metals (later “Metal etcher”, “equipment” or “tool”). The equipment will be installed in the Micronova facility in Espoo, which is jointly used by VTT Technical Research Centre of Finland Ltd. (VTT) and Aalto University for research, development and small-volume production. The cleanroom classification is ISO 4…ISO 6 (10…1000). The total area of the cleanroom is 2 600 m2, and there is an installed equipment base of 200 processing and measurement …
Näytä hankinnat » Mainitut toimittajat:SENTECH Instruments GmbH
2021-08-18Automatic Mask Aligner (VTT Technical Research Centre of Finland Ltd)
VTT is looking for a fully automated mask aligner used to UV expose photoresist coated wafers in order to transfer the mask image 1:1 onto the photoresist. The mask aligner must be able to process wafers of 8-inch diameter SEMI standard of various thicknesses and transparency.
The object of the tender process is described in more detail in the invitation to tender documents.
Näytä hankinnat » Mainitut toimittajat:Optical Associates, Inc.