Spinning disk confocal microscope

University of Turku

The University of Turku intends to purchase a fully motorized spinning-disc confocal microscope for combined high-speed, high-throughput, and high-resolution analysis of a large variety of biological specimens, ranging from live single cells to fixed thick tissue sections and model organisms. The system to be purchased must include: 1) A versatile fully motorized, research grade, inverted light microscope body, equipped for both fluorescence and trans-illumination imaging, and hardware and software to enable multi-colour image acquisition of 2D and 3D single position, automatic multi-position, and tiled image data sets in fluorescence and trans-illumination imaging mode. The diagonal field of view of at least one camera port should be ≥ 25 mm. 2) A spinning disc unit with a diagonal field of view of ≥ 22mm, an imaging scan speed of ≥200 frames per second, and field uniformizer optics that enable flat field imaging up to (or near) the full diagonal field of view of the spinning disc unit. 3) A back-illuminated CMOS camera with a pixel size of ≤ 6.5 µm and a diagonal field of view that takes maximum advantage of the field of view of the microscope camera port as well as the maximum field of view of the spinning disc unit. 4) A high power laser combiner that spans from near UV excitation at 405 nm to NIR excitation at λ≥730 nm. The laser combiner must contain a minimum of 5 laser lines at (or near) 405, 488, 561, 640, and 730 nm. 5) A range of research grade microscope objectives suitable for imaging a broad range of samples and sample configurations including for diffraction-limited imaging of fixed samples. 6) The microscope system must include a black cage incubator with calibrated temperature and CO2 control including sensors suitable for monitoring the temperature both in the incubator and in the sample media. Please note that we are requesting a number of exemplary data sets that will later serve as reference data sets to which we can compare the performance of the installed microscope system from the winning bid.

Määräaika

Tarjousten vastaanottamisen määräaika oli 2024-12-09. Hankinta julkaistiin 2024-10-30.

Kuka?

• University of Turku

Mitä?

• Testaus- ja koelaitteet › Mikroskoopit

Missä?

• Helsinki-Uusimaa › Helsinki-Uusimaa
• Etelä-Suomi › Varsinais-Suomi

Hankintojen historia

Päivämäärä	Asiakirja
2024-10-30	hankintailmoitus

hankintailmoitus (2024-10-30)
Kohde
Hankinnan laajuus
Otsikko: Spinning disk confocal microscope
Viitenumero: 529368
Lyhyt kuvaus:
“The University of Turku intends to purchase a fully motorized spinning-disc confocal microscope for combined high-speed, high-throughput, and...”

Lyhyt kuvaus

The University of Turku intends to purchase a fully motorized spinning-disc confocal microscope for combined high-speed, high-throughput, and high-resolution analysis of a large variety of biological specimens, ranging from live single cells to fixed thick tissue sections and model organisms.

The system to be purchased must include:

1) A versatile fully motorized, research grade, inverted light microscope body, equipped for both fluorescence and trans-illumination imaging, and hardware and software to enable multi-colour image acquisition of 2D and 3D single position, automatic multi-position, and tiled image data sets in fluorescence and trans-illumination imaging mode. The diagonal field of view of at least one camera port should be ≥ 25 mm.
2) A spinning disc unit with a diagonal field of view of ≥ 22mm, an imaging scan speed of ≥200 frames per second, and field uniformizer optics that enable flat field imaging up to (or near) the full diagonal field of view of the spinning disc unit.
3) A back-illuminated CMOS camera with a pixel size of ≤ 6.5 µm and a diagonal field of view that takes maximum advantage of the field of view of the microscope camera port as well as the maximum field of view of the spinning disc unit.
4) A high power laser combiner that spans from near UV excitation at 405 nm to NIR excitation at λ≥730 nm. The laser combiner must contain a minimum of 5 laser lines at (or near) 405, 488, 561, 640, and 730 nm.
5) A range of research grade microscope objectives suitable for imaging a broad range of samples and sample configurations including for diffraction-limited imaging of fixed samples.
6) The microscope system must include a black cage incubator with calibrated temperature and CO2 control including sensors suitable for monitoring the temperature both in the incubator and in the sample media.

Please note that we are requesting a number of exemplary data sets that will later serve as reference data sets to which we can compare the performance of the installed microscope system from the winning bid.

Sopimustyyppi: Tavarat
Tuotteet/palvelut: Mikroskoopit 📦
Kuvaus
Hankinnan kuvaus:
“The University of Turku intends to purchase a fully motorized spinning-disc confocal microscope for combined high-speed, high-throughput, and...”

Hankinnan kuvaus

The University of Turku intends to purchase a fully motorized spinning-disc confocal microscope for combined high-speed, high-throughput, and high-resolution analysis of a large variety of biological specimens, ranging from live single cells to fixed thick tissue sections and model organisms.

The system to be purchased must include:

1) A versatile fully motorized, research grade, inverted light microscope body, equipped for both fluorescence and trans-illumination imaging, and hardware and software to enable multi-colour image acquisition of 2D and 3D single position, automatic multi-position, and tiled image data sets in fluorescence and trans-illumination imaging mode. The diagonal field of view of at least one camera port should be ≥ 25 mm.
2) A spinning disc unit with a diagonal field of view of ≥ 22mm, an imaging scan speed of ≥200 frames per second, and field uniformizer optics that enable flat field imaging up to (or near) the full diagonal field of view of the spinning disc unit.
3) A back-illuminated CMOS camera with a pixel size of ≤ 6.5 µm and a diagonal field of view that takes maximum advantage of the field of view of the microscope camera port as well as the maximum field of view of the spinning disc unit.
4) A high power laser combiner that spans from near UV excitation at 405 nm to NIR excitation at λ≥730 nm. The laser combiner must contain a minimum of 5 laser lines at (or near) 405, 488, 561, 640, and 730 nm.
5) A range of research grade microscope objectives suitable for imaging a broad range of samples and sample configurations including for diffraction-limited imaging of fixed samples.
6) The microscope system must include a black cage incubator with calibrated temperature and CO2 control including sensors suitable for monitoring the temperature both in the incubator and in the sample media.

Please note that we are requesting a number of exemplary data sets that will later serve as reference data sets to which we can compare the performance of the installed microscope system from the winning bid.

Suorituspaikka: Varsinais-Suomi 🏙️
Kesto: 24 (MONTH)
Jäljempänä oleva aikataulu on ilmaistu kuukausina.
Tietoa vaihtoehdoista
Vaihtoehdot ✅
Vaihtoehtojen kuvaus:
“The tenderer is requested to include a separate description, including pricing, of at least the following options: 1) Second back-illuminated CMOS camera...”
Myöntämisperusteet
Hinta ✅
Hinta (painotus): 70
Laatukriteeri (nimi): Quality Criteria
Laatukriteeri (painotus): 30
Otsikko
Erän tunnistenumero: LOT-0000

Menettely
Toimenpiteen tyyppi
Avoin menettely ✅
Hallinnolliset tiedot
Tarjousten tai osallistumishakemusten vastaanottamisen määräaika: 2024-12-09 11:00:00 📅
Tarjousten avaamista koskevat ehdot: 2024-12-09 11:30:00 📅
Kielet, joilla tarjoukset tai osallistumishakemukset voidaan jättää: englanti 🗣️
Vähimmäisaika, jonka kuluessa tarjoajan on pidettävä tarjous voimassa: 4

Oikeudelliset, taloudelliset, rahoitukselliset ja tekniset tiedot
Tekninen ja ammatillinen pätevyys
Luettelo ja lyhyt kuvaus valintaperusteista:
“References: The tenderer shall include a list of reference sites (at least two (2) different parties), where the tenderer has successfully delivered and...”

Hankintaviranomainen
Nimi ja osoitteet
Nimi: University of Turku
Kansallinen rekisterinumero: 0245896-3
Postiosoite: Yliopistonmäki
Postinumero: 20014
Postitoimipaikka: Turun yliopisto
Alue: Varsinais-Suomi 🏙️
Maa: Suomi 🇫🇮
Sähköposti: procurement@utu.fi 📧
Puhelin: +358 294505000 📞
URL: http://www.utu.fi 🌏
Hankintaviranomaisen tyyppi
Julkisoikeudellinen yhteisö
Päätoimi
Koulutus
Viestintä
Asiakirjojen URL-osoite: https://tarjouspalvelu.fi/utu?id=529368&tpk=b2dedc4c-f70a-4024-8175-69a8b7cdfd2c 🌏
Osallistumisen URL-osoite: https://tarjouspalvelu.fi/utu?id=529368&tpk=b2dedc4c-f70a-4024-8175-69a8b7cdfd2c 🌏

Täydentävät tiedot
Arvostelurunko
Nimi: Markkinaoikeus
Kansallinen rekisterinumero: 3006157-6
Postiosoite: Radanrakentajantie 5
Postinumero: 00520
Postitoimipaikka: Helsinki
Alue: Helsinki-Uusimaa 🏙️
Maa: Suomi 🇫🇮
Sähköposti: markkinaoikeus@oikeus.fi 📧
Puhelin: +358 295643300 📞
URL: http://www.oikeus.fi/markkinaoikeus 🌏
Tietoa sähköisistä työnkuluista
Sähköinen laskutus hyväksytään
Sähköistä tilaamista käytetään
Sähköistä maksua käytetään
Lähde: OJS 2024/S 213-664833 (2024-10-30)

Uudet hankinnat asiaan liittyvissä luokissa 🆕

Laboratoriolaitteet, optiset ja tarkkuuslaitteet (lukuun ottamatta silmälaseja) (11 uudet hankinnat)

Testaus- ja koelaitteet (1)

Mikroskoopit (1)