Laboratory scale polymer extruder

Tampere University Foundation sr

Tampere University is inviting tenders for a Laboratory scale polymer extruder. The university has a need for a laboratory scale benchtop twin-screw extruder and accessories for thermal processing of thermoplastic polymers. The accessories include a gravimetric feeder, a conveyor belt and a set of dies. The devices will be used for low throughput extrusion of thermoplastic polymers and their composites with glass/ceramic fibers and particles. Research groups at the university are working with a wide and changing range of materials, polylactide being the most commonly used polymer.

Määräaika

Tarjousten vastaanottamisen määräaika oli 2023-12-28. Hankinta julkaistiin 2023-11-28.

Kuka? Mitä? Missä?
Hankintojen historia
Päivämäärä Asiakirja
2023-11-28 hankintailmoitus
hankintailmoitus (2023-11-28)
Kohde
Hankinnan laajuus
Otsikko: Laboratory scale polymer extruder
Viitenumero: TAU/5303/2023
Lyhyt kuvaus:
Tampere University is inviting tenders for a Laboratory scale polymer extruder. The university has a need for a laboratory scale benchtop twin-screw extruder and accessories for thermal processing of thermoplastic polymers. The accessories include a gravimetric feeder, a conveyor belt and a set of dies. The devices will be used for low throughput extrusion of thermoplastic polymers and their composites with glass/ceramic fibers and particles. Research groups at the university are working with a wide and changing range of materials, polylactide being the most commonly used polymer.
Näytä lisää
Sopimustyyppi: Tavarat
Tuotteet/palvelut: Laboratoriolaitteet, optiset ja tarkkuuslaitteet (lukuun ottamatta silmälaseja) 📦
Arvioitu arvo ilman arvonlisäveroa: 195 000 EUR 💰
Kuvaus
Sisäinen tunniste: 681634
Tämä hankinta soveltuu myös pienille ja keskisuurille yrityksille (pk-yrityksille)
Lisätietoja:
The same tenderer can submit multiple tenders, e.g. one for a new instrument and one for a used, but fully refurbished (more high-end type of device). Also, some of the additional but mandatory components can be offered as used. Guidance for a possibly tendered used extruder: the university expects the inside surfaces of the screw and barrel to show no wear. Preferably the device has not been used to process hard materials such as glass fiber reinforced polymers.
Näytä lisää
Tietoa muunnelmista
Vaihtoehdot hyväksytään
Myöntämisperusteet
Hinta
Hinta (painotus): 25
Laatukriteeri (painotus): 75
Otsikko
Erän tunnistenumero: LOT-0000

Menettely
Toimenpiteen tyyppi
Avoin menettely
Oikeusperusta: Direktiivi 2014/24/EU
Menettelyn tärkeimmät piirteet:
The comparison of tenders has the following phases: The contracting authority will: 1. Open the tenders 2. Check the answers in the European Single Procurement Document (ESPD) concerning the suitability of the tender. 3. Check that the tender complies with the contract notice and the invitation to tender in form and content. 4. Compare the tenders. 5. Choose the best tender based on the award criteria. 6. Make the procurement decision and inform all the tenderers. 7. Check the certificates (e.g. extract from criminal record) from the awarded tenderer concerning the tenderer’s suitability. 8. Sign the procurement contract with the awarded tenderer. Procurement contract is valid only after it has been signed. Procurement contract can be signed after the procurement decision has become legally valid. When the value of the procurement exceeds the threshold for EU procurement, the procurement contract can be signed at the earliest 14 days after the tenderer has been informed, or is deemed to have been informed, of the decision and its justification. The opening of the tenders is not public.
Näytä lisää
Hallinnolliset tiedot
Tarjousten tai osallistumishakemusten vastaanottamisen määräaika: 2023-12-28 12:00:00 📅
Tarjousten avaamista koskevat ehdot: 2023-12-28 13:00:00 📅
Tarjousten avaamista koskevat ehdot (paikka): Tampere University
Kielet, joilla tarjoukset tai osallistumishakemukset voidaan jättää: englanti 🗣️
Vähimmäisaika, jonka kuluessa tarjoajan on pidettävä tarjous voimassa: 3 kuukautta
Tarjouspyynnön ehdot
Tarjoaja voi jättää useamman kuin yhden tarjouksen
Tarjousten avaamisen päivämäärä: 2023-12-28 13:00:00 📅
Paikka: Tampere University
Sähköinen laskutus: Pakollinen
Sähköistä maksua käytetään
Lisätietojen pyytämisen määräaika: 2023-12-11 16:00:00 📅

Oikeudelliset, taloudelliset, rahoitukselliset ja tekniset tiedot
Taloudellinen ja rahoituksellinen asema
Luettelo ja lyhyt kuvaus valintaperusteista:
Turnover minimum: Turnover minimum 450 000 € in the last 12 months.
Tenderer confirms that it is not subject to any international sanctions due to the Russo-Ukrainian war.
Osallistumisehdot
Poissulkemisperuste:
Ennenaikainen irtisanominen, vahingonkorvaukset tai muut vastaavat seuraamukset
Järjestelyt velkojien kanssa
Kansallisesta lainsäädännöstä johtuva konkurssia tai muuta sellaista vastaava tilanne
+ 21 lisää
Konkurssi
Korruptio
Lapsityövoima ja muut ihmiskaupan muodot
Liiketoiminta on keskeytetty
Maksukyvyttömyys
Petos
Puhtaasti kansalliset poissulkemisperusteet
Rahanpesu tai terrorismin rahoitus
Rikollisjärjestön toimintaan osallistuminen
Sosiaalilainsäädännön mukaisten velvoitteiden rikkominen
Sosiaaliturvamaksujen maksaminen
Syyllistyminen ammatin harjoittamiseen liittyvään vakavaan virheeseen
Syyllistyminen väärien tietojen antamiseen, tietojen antamatta jättämiseen, vaadittujen asiakirjojen antamiseen kykenemättömien tietojen toimittamiseen ja tätä menettelyä koskevien luottamuksellisten tietojen antamiseen
Talouden toimijan hankintamenettelyyn osallistumisesta johtuvat eturistiriidat
Terrorismirikokset tai terroritoimintaan liittyvät rikokset
Toisten talouden toimijoiden kanssa kilpailun vääristämiseksi tehdyt sopimukset
Työlainsäädännön mukaisten velvoitteiden rikkominen
Varat selvitysmiehen hallinnassa
Verojen maksu
Välitön tai välillinen osallistuminen tämän hankintamenettelyn valmisteluun
Ympäristölainsäädännön mukaisten velvoitteiden rikkominen
Kuvaus poissulkemisperusteista: See ESPD.

Hankintaviranomainen
Nimi ja osoitteet
Nimi: Tampere University Foundation sr
Kansallinen rekisterinumero: 2844561-8
Postinumero: 33100
Postitoimipaikka: Tampere
Alue: Pirkanmaa 🏙️
Maa: Suomi 🇫🇮
Yhteyspiste: Arto Heikkilä
Sähköposti: hankinnat@tuni.fi 📧
Puhelin: +358 2945211 📞
URL: http://www.tuni.fi/en 🌏
Hankintaviranomaisen tyyppi
Julkisoikeudellinen yhteisö
Päätoimi
Koulutus
Viestintä
Asiakirjojen URL-osoite: https://tarjouspalvelu.fi/tuni?id=483725&tpk=9e5b0b44-7d0a-460c-81ed-d23414ee9c13 🌏
Osallistumisen URL-osoite: https://tarjouspalvelu.fi/tuni?id=483725&tpk=9e5b0b44-7d0a-460c-81ed-d23414ee9c13 🌏
Tarjouksen/hakemuksen jättäminen sähköisesti: Pakollinen

Täydentävät tiedot
Lisätietoja
The same tenderer can submit multiple tenders, e.g. one for a new instrument and one for a used, but fully refurbished (more high-end type of device). Also, some of the additional but mandatory components can be offered as used. Guidance for a possibly tendered used extruder: the university expects the inside surfaces of the screw and barrel to show no wear. Preferably the device has not been used to process hard materials such as glass fiber reinforced polymers.
Näytä lisää
Arvostelurunko
Nimi: Markkinaoikeus
Kansallinen rekisterinumero: 3006157-6
Postiosoite: Radanrakentajantie 5
Postinumero: 00520
Postitoimipaikka: Helsinki
Alue: Helsinki-Uusimaa 🏙️
Maa: Suomi 🇫🇮
Sähköposti: markkinaoikeus@oikeus.fi 📧
Puhelin: +358 295643300 📞
URL: http://www.oikeus.fi/markkinaoikeus 🌏
Tietoa sähköisistä työnkuluista
Sähköinen laskutus hyväksytään
Lähde: OJS 2023/S 230-725640 (2023-11-28)