The object of the tender process is the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL), suitable for environmental monitoring and aerial surveillance (hereinafter referred to as "the Device" or "the drone"). The device complies with mandatory technical and other requirements specified in detail in the call for tenders. It includes all necessary equipment, software, and documentation for both the aerial vehicle and the Ground Control Station (GCS). The device incorporates a GCS solution as part of the system and is designed to comply with SAIL III (Specific Assurance and Integrity Level III) standards. It is equipped with an integrated LiDAR sensor, object tracking capabilities, and support for Points of Interest (POI) functionality. The device enables quick and straightforward unpacking and immediate commencement of operation. It is also configurable for different use cases and payload configurations. The device shall be a reliable aerial vehicle suitable which has been factory test prior to client's acceptance of the delivery. Therefore, it must be a commercial product. To ensure the maturity of the drone model offered, the tenderer shall provide details of five (5) completed reference deliveries of similar contracts. The major components of these drones shall be identical. Maintenance checks and possible calibrations of equipment shall be available, if needed, from the Supplier also after the warranty period has ended. The Supplier shall guarantee the availability of spare parts also after the warranty period (2 years) has ended. The object of the tender process is described in more detail in the invitation to tender documents. As a result of the competitive bidding VTT reserves the right to select a primary and a backup supplier. The backup supplier shall be used in case the primary supplier fails to deliver the device in time.
Määräaika
Tarjousten vastaanottamisen määräaika oli 2025-08-22.
Hankinta julkaistiin 2025-07-03.
Toimittajat
Seuraavat toimittajat mainitaan hankintapäätöksissä tai muissa hankinta-asiakirjoissa:
hankintailmoitus (2025-07-03) Kohde Hankinnan laajuus
Otsikko: eVTOL Drone
Viitenumero: 56/206/2025
Lyhyt kuvaus:
“The object of the tender process is the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL),...”
Lyhyt kuvaus
The object of the tender process is the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL), suitable for environmental monitoring and aerial surveillance (hereinafter referred to as "the Device" or "the drone").
The device complies with mandatory technical and other requirements specified in detail in the call for tenders. It includes all necessary equipment, software, and documentation for both the aerial vehicle and the Ground Control Station (GCS). The device incorporates a GCS solution as part of the system and is designed to comply with SAIL III (Specific Assurance and Integrity Level III) standards. It is equipped with an integrated LiDAR sensor, object tracking capabilities, and support for Points of Interest (POI) functionality. The device enables quick and straightforward unpacking and immediate commencement of operation. It is also configurable for different use cases and payload configurations.
The device shall be a reliable aerial vehicle suitable which has been factory test prior to client's acceptance of the delivery. Therefore, it must be a commercial product. To ensure the maturity of the drone model offered, the tenderer shall provide details of five (5) completed reference deliveries of similar contracts. The major components of these drones shall be identical.
Maintenance checks and possible calibrations of equipment shall be available, if needed, from the Supplier also after the warranty period has ended. The Supplier shall guarantee the availability of spare parts also after the warranty period (2 years) has ended.
The object of the tender process is described in more detail in the invitation to tender documents.
As a result of the competitive bidding VTT reserves the right to select a primary and a backup supplier. The backup supplier shall be used in case the primary supplier fails to deliver the device in time.
Näytä lisää
Sopimustyyppi: Tavarat
Tuotteet/palvelut: Miehittämättömät ilma-alukset📦
Arvioitu arvo ilman arvonlisäveroa: 225 000 EUR 💰
Kuvaus
Hankinnan kuvaus:
“The object of the tender process is the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL),...”
Hankinnan kuvaus
The object of the tender process is the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL), suitable for environmental monitoring and aerial surveillance (hereinafter referred to as "the Device" or "the drone").
The device complies with mandatory technical and other requirements specified in detail in the call for tenders. It includes all necessary equipment, software, and documentation for both the aerial vehicle and the Ground Control Station (GCS). The device incorporates a GCS solution as part of the system and is designed to comply with SAIL III (Specific Assurance and Integrity Level III) standards. It is equipped with an integrated LiDAR sensor, object tracking capabilities, and support for Points of Interest (POI) functionality. The device enables quick and straightforward unpacking and immediate commencement of operation. It is also configurable for different use cases and payload configurations.
The device shall be a reliable aerial vehicle suitable which has been factory test prior to client's acceptance of the delivery. Therefore, it must be a commercial product. To ensure the maturity of the drone model offered, the tenderer shall provide details of five (5) completed reference deliveries of similar contracts. The major components of these drones shall be identical.
Maintenance checks and possible calibrations of equipment shall be available, if needed, from the Supplier also after the warranty period has ended. The Supplier shall guarantee the availability of spare parts also after the warranty period (2 years) has ended.
The object of the tender process is described in more detail in the invitation to tender documents.
As a result of the competitive bidding VTT reserves the right to select a primary and a backup supplier. The backup supplier shall be used in case the primary supplier fails to deliver the device in time.
Menettely Toimenpiteen tyyppi
Avoin menettely ✅ Hallinnolliset tiedot
Tarjousten tai osallistumishakemusten vastaanottamisen määräaika: 2025-08-22 09:00:00 📅
Tarjousten avaamista koskevat ehdot: 2025-08-22 09:15:00 📅
Kielet, joilla tarjoukset tai osallistumishakemukset voidaan jättää: englanti 🗣️
Vähimmäisaika, jonka kuluessa tarjoajan on pidettävä tarjous voimassa: 3
Oikeudelliset, taloudelliset, rahoitukselliset ja tekniset tiedot Tekninen ja ammatillinen pätevyys
Luettelo ja lyhyt kuvaus valintaperusteista:
“Reference sites: The Tender shall include a list of reference sites
from five (5) different clients where the Tenderer has, within the past three (3) years,...”
Luettelo ja lyhyt kuvaus valintaperusteista
Reference sites: The Tender shall include a list of reference sites
from five (5) different clients where the Tenderer has, within the past three (3) years, successfully delivered and commissioned a corresponding device to full operational status.
The Tenderer shall upload Annex 2 Company Reference, indicating that they have completed a reference delivery of similar contracts.
“The object of the tender process is described in more detail in the invitation to tender documents.” Arvostelurunko
Nimi: Markkinaoikeus
Kansallinen rekisterinumero: 3006157-6
Postiosoite: Radanrakentajantie 5
Postinumero: 00520
Postitoimipaikka: Helsinki
Alue: Helsinki-Uusimaa🏙️
Maa: Suomi 🇫🇮
Sähköposti: markkinaoikeus@oikeus.fi📧
Puhelin: +358 295643300📞
URL: http://www.oikeus.fi/markkinaoikeus🌏 Tietoa sähköisistä työnkuluista
Sähköinen laskutus hyväksytään
Sähköistä tilaamista käytetään
Sähköistä maksua käytetään
Lähde: OJS 2025/S 127-438255 (2025-07-03)
Ilmoitus tehdystä sopimuksesta (2026-04-24) Kohde Hankinnan laajuus
Otsikko: CONTRACT AWARD NOTICE: eVTOL Drone
Lyhyt kuvaus:
“The object of the tender process was the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL),...”
Lyhyt kuvaus
The object of the tender process was the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL), suitable for environmental monitoring and aerial surveillance (hereinafter referred to as "the Device" or "the drone").
The device complied with mandatory technical and other requirements specified in detail in the invitation to tender. It included all necessary equipment, software, and documentation for both the aerial vehicle and the Ground Control Station (GCS). The device incorporated a GCS solution as part of the system and was designed to comply with SAIL III (Specific Assurance and Integrity Level III) standards. It was equipped with an integrated LiDAR sensor, object tracking capabilities, and support for Points of Interest (POI) functionality. The device enabled quick and straightforward unpacking and immediate commencement of operation. It was also configurable for different use cases and payload configurations.
The device was a reliable aerial vehicle suitable which had been factory tested prior to client's acceptance of the delivery. Therefore, it had to be a commercial product. To ensure the maturity of the drone model offered, the tenderer provided details of five (5) completed reference deliveries of similar contracts. The major components of these drones were identical.
Maintenance checks and possible calibrations of equipment were available, if needed, from the Supplier also after the warranty period had ended. The Supplier guaranteed the availability of spare parts also after the warranty period (2 years) had ended.
The object of the tender process was described in more detail in the invitation to tender documents.
As a result of the competitive bidding VTT reserved the right to select a primary and a backup supplier. The backup supplier was used in case the primary supplier failed to deliver the device in time.
Näytä lisää
Arvioitu arvo ilman arvonlisäveroa: 225 000 EUR 💰
Hankinnan kokonaisarvo (ilman arvonlisäveroa): 150 000 EUR 💰
Kuvaus
Hankinnan kuvaus:
“The object of the tender process was the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL),...”
Hankinnan kuvaus
The object of the tender process was the procurement of an unmanned aerial vehicle (UAV) system capable of electric vertical take-off and landing (eVTOL), suitable for environmental monitoring and aerial surveillance (hereinafter referred to as "the Device" or "the drone").
The device complied with mandatory technical and other requirements specified in detail in the invitation to tender. It included all necessary equipment, software, and documentation for both the aerial vehicle and the Ground Control Station (GCS). The device incorporated a GCS solution as part of the system and was designed to comply with SAIL III (Specific Assurance and Integrity Level III) standards. It was equipped with an integrated LiDAR sensor, object tracking capabilities, and support for Points of Interest (POI) functionality. The device enabled quick and straightforward unpacking and immediate commencement of operation. It was also configurable for different use cases and payload configurations.
The device was a reliable aerial vehicle suitable which had been factory tested prior to client's acceptance of the delivery. Therefore, it had to be a commercial product. To ensure the maturity of the drone model offered, the tenderer provided details of five (5) completed reference deliveries of similar contracts. The major components of these drones were identical.
Maintenance checks and possible calibrations of equipment were available, if needed, from the Supplier also after the warranty period had ended. The Supplier guaranteed the availability of spare parts also after the warranty period (2 years) had ended.
The object of the tender process was described in more detail in the invitation to tender documents.
As a result of the competitive bidding VTT reserved the right to select a primary and a backup supplier. The backup supplier was used in case the primary supplier failed to deliver the device in time.
Näytä lisää
Lisätietoja:
“The object of the tender process was described in more detail in the invitation to tender documents.”
Suorituspaikka: Pohjois-Pohjanmaa🏙️ Tietoa vaihtoehdoista
Vaihtoehdot ✅
Vaihtoehtojen kuvaus:
“The tenderer could offer a docking station for the GCS and provide an hourly rate for maintenance and fault correction.
More detailed information is...”
Vaihtoehtojen kuvaus
The tenderer could offer a docking station for the GCS and provide an hourly rate for maintenance and fault correction.
More detailed information is provided in the invitation to tender.
“The object of the tender process was described in more detail in the invitation to tender documents.” Uudelleentarkastelumenettely
Tarkat tiedot uudelleentarkastelumenettelyjen määräajasta (määräajoista):
“After the procurement decision, the statutory 14 days appeal period was observed prior to the signing of the contract.”
Lähde: OJS 2026/S 082-289153 (2026-04-24)