FWITC Machineries and Equipment

Niras Finland Oy

The objective of this procurement is to strengthen Forestry and Wood Industries Training Centre (FWITC) Sawmill by improving its machinery and logs handling capacity. The overall procurement is divided into Twelve (12) lots for tender purposes. Tenderers are invited to tender for any combination of these LOTS, but separate technical proposals are required for each lot. The information on the 12 lots is included in the Terms of Reference available under this notice.

Määräaika

Tarjousten vastaanottamisen määräaika oli 2026-05-15. Hankinta julkaistiin 2026-04-10.

Kuka?

• Niras Finland Oy

Mitä?

• Sähkökoneet, -kojeet, -laitteet ja -kulutustarvikkeet; valaistus

Missä?

• Helsinki-Uusimaa › Helsinki-Uusimaa

Hankintojen historia

Päivämäärä	Asiakirja
2026-04-10	hankintailmoitus

hankintailmoitus (2026-04-10)
Kohde
Hankinnan laajuus
Otsikko: FWITC Machineries and Equipment
Viitenumero: 51400085/005
Lyhyt kuvaus:

Sopimustyyppi: Tavarat
Tuotteet/palvelut: Sähkökoneet, -kojeet, -laitteet ja -kulutustarvikkeet; valaistus 📦
Arvioitu arvo ilman arvonlisäveroa: 160 000 EUR 💰
Suorituspaikkaa koskevat rajoitukset: Missä tahansa tietyn maan alueella
Tietoa eristä
Tämä sopimus on jaettu osiin ✅
Yhdelle tarjoajalle myönnettävien erien enimmäismäärä: 12
Tarjouksia voidaan jättää enintään yhtä erää varten: 12

1️⃣
Sisäinen tunniste: 2026-046214-LOT-0001
Otsikko: Finger joint profiler fitted with profile cutters (batch system) Vertical boards clamping. Long length board system
Tämä hankinta soveltuu myös pienille ja keskisuurille yrityksille (pk-yrityksille) ✅
Hankinnan kuvaus:

Finger Joint Profiler•Type: Finger Joint System with Integrated Crosscut Saw and Profiling Cutters•Capacity: Minimum 3 m length, 160 mm width, 50 mm thickness boards•Crosscut Saw: Integrated, carbide tipped blade for trimming end capable of cutting 160mm boards•Profiling Cutters heads: Precision cutters for finger joint profiles•Clamping System: Batch clamping tray for multiple boards, edge clamping with mechanical or pneumatics.•Swivel Function: Tray must swivel/rotate to process opposite ends•Feed System: Powered hydraulic/mechanical feed with adjustable speed•Motor Power: Minimum 7.5 kW for cutters, 3 kW for saw•Safety Features: Emergency stop, protective guards, dust extraction ports•Construction: Heavy duty steel frame, vibration free operation•Training Suitability: Easy adjustment, clear operator manuals, vendor training supportProfile cutters•Type: Solid or Wing Finger Joint Profile Cutter Set for Structural Timber•Profile Length: 20 mm finger length on 200mm wide board•Cutter Diameter: 160–200 mm•Bore Size: 40 mm or 50 mm (to match machine spindle)•Knife Material: Tungsten carbide tipped (TCT) or solid HSS•Balance: Precision balanced for high speed rotation (up to 6000 rpm)•Compatibility: Must fit finger joint/crosscut combination machine specified in tender•Safety Standards: Compliant with EN/ISO woodworking tool safety requirements•Training Suitability: Easy knife replacement, vendor support for sharpening and maintenance

Edistettävä sosiaalinen tavoite: Ihmisoikeuksia koskeva due diligence -velvoite maailmanlaajuisissa toimitusketjuissa
Maa: Tansania 🇹🇿
Myöntämisperusteet
Hinta ✅
Hinta (painotus): 80
Laatukriteeri (nimi): Quality
Laatukriteeri (painotus): 20
Otsikko
Erän tunnistenumero: LOT-0001

2️⃣
Sisäinen tunniste: 2026-046214-LOT-002
Otsikko: Finger Joint Press
Hankinnan kuvaus:

•Hydraulic finger jointing cycle press (single joint press)•Continuous system, unlimited length.•Press force: 10 t•Timber width: 80 - 200 mm •Timber thickness 18 - 80 mm•Timber length: 350- 6000mm•Hydraulic unit: 300 l, 5,5 kW motor.

Otsikko
Erän tunnistenumero: LOT-0012

3️⃣
Sisäinen tunniste: 2026-046214-LOT-003
Otsikko: Cross cut (mitre) saw. Radial arm saw type
Hankinnan kuvaus:

•Type: Industrial Radial Arm Saw for Crosscutting Timber•Cutting Capacity: Minimum 80 mm thickness, 500 mm width•Blade Diameter: 400–500 mm carbide-tipped blade•Motor Power: Minimum 3 HP, preferred 4–5 HP for hardwood•Table Size: Large (3m support either side), stable work table suitable for 3 m boards•Cutting Functions: Crosscut, mitre, and bevel cutting capability•Safety Features: Blade guard, riving knife, emergency stop, dust extraction port•Construction: Cast iron/steel frame for durability•Training Suitability: Easy adjustment, clear operator manuals, vendor training support

Otsikko
Erän tunnistenumero: LOT-0013

4️⃣
Sisäinen tunniste: 2026-046214-LOT-004
Otsikko: 4-sided planer (Laminated beam planing)
Hankinnan kuvaus:

•Type: Four Sided Planing/Moulding Machine for Laminated Timber Beams•Capacity: Minimum 200 mm thickness, 500 mm width•Cutting Heads: Four sided planing (top, bottom, left, right) fitted with long bladed knives•Motor Power: Minimum 7.5 kW per spindle, preferred 11–15 kW for wide beams•Feed System: Powered infeed and outfeed rollers with adjustable speed control•Support Rollers: Infeed and outfeed support rollers for long beams•Tolerance: Dimensional accuracy ±0.1–0.3 mm•Safety Features: Emergency stop, protective guards, dust extraction ports•Construction: Heavy duty cast iron/steel frame, vibration free operation•Training Suitability: Easy adjustment, clear operator manuals, vendor training support

Otsikko
Erän tunnistenumero: LOT-0014

5️⃣
Sisäinen tunniste: 2026-046214-LOT-005
Otsikko: Band resaw (splitting laminated beam, deep ripping.)
Hankinnan kuvaus:

General Description•Horizontal blade configuration optimized for cants, boards, and laminated timber•High-precision cutting with repeatable thickness accuracy•Robust construction for continuous operation in medium-to-large production facilities•Adjustable digital or manual controls for precise blade positioning and variable feed speed•Comprehensive safety features to ensure operator and environmental protectionBlade Specifications•Thin-kerf blade: 25–35 mm width, 0.9–1.4 mm thickness•Material: High-speed steel, SK8 carbon steel, or induction-hardened steel•Adjustable roller blade guides •Manual or automatic blade straining systemCutting Capacity•Max workpiece width: 500 mm•Max workpiece height: 250 mm•Minimum feed length: 2 meters (extendable for longer production lines)•Dial controlled variable feed speed: 0–27 m/minFeed System•Controlled powered continuous conveyor belt or metal track feeding•Adjustable infeed/outfeed top pressure rollers•Feed system maintaining lamella thickness within ±0.1 mmMotors and Power•3 phase motors•Primary saw motor: 18–25 kW•Auxiliary feed motors: 1.5–3 kW•Electrical system compliant with CE or equivalent safety standards and local occupational regulationsOperational Features•Digital/manual blade height adjustment to 0.5mm accuracy•Blade lubricating system•Dust extraction shoot minimum 102mm diameter.•Amp meter indicator on main drive motorSafety and Environmental Requirements•Pneumatic/mechanical hold-down rollers•Blade guards and emergency stopsDimensions and Installation•Approximate dimensions: 3 x 2.25 x 2 meters•Weight: 1,750–1,950 kg, depending on configuration•Installation provisions for electrical, pneumatic, and dust extraction connectionsDocumentation and Warranty•Comprehensive user and maintenance manuals•Electrical and mechanical schematics

Otsikko
Erän tunnistenumero: LOT-0015

6️⃣
Sisäinen tunniste: 2026-046214-LOT-006
Otsikko: Hydraulic press with High Frequency (HF) heating system (pressing bent plywood)
Hankinnan kuvaus:

•Type: High Frequency Hydraulic Press for Woodworking (multi purpose)•Work Table Size: Minimum 2500 × 1250 mm•Maximum Pressure: 120–160 tons hydraulic system•Heating Type: High Frequency (Radio Frequency) Generator•HF Output Power: 30–50 kW minimum•Frequency Range: 6.78–13.56 MHz•Cycle Time: 1–3 minutes per press cycle•Applications: Bent plywood molds, flat plywood sheets, laminated flooring, composite doors•Safety Features: Emergency stop, protective enclosure, •Training & Support: Vendor must provide installation, operator training, and maintenance support

Otsikko
Erän tunnistenumero: LOT-0016

7️⃣
Sisäinen tunniste: 2026-046214-LOT-007
Otsikko: CNC Router (Produce molds for bent plywood furniture manufacturing)
Hankinnan kuvaus:

•Type: Industrial 5 Axis CNC Router for Woodworking•Work Area: Minimum 2400 × 1200 mm (expandable preferred)•Spindle Power: 8–12 kW, water or air-cooled•Axes: X, Y, Z, A, B with simultaneous motion capability•Control System: Compatible with Mach4/UCCNC or vendor-provided, with training support•Safety: Emergency stop, dust extraction, protective enclosure•Accessories: Automatic tool changer, vacuum table for sheet holding•Training & Support: Vendor must provide installation, operator training, and maintenance support

Otsikko
Erän tunnistenumero: LOT-0017

8️⃣
Sisäinen tunniste: 2026-046214-LOT-0018
Otsikko: Solar wood drying kiln (includes construction on site)
Hankinnan kuvaus:

•Greenhouse with footprint 8x10 m•Steel tubing ribs forming half round structure.•2 layers of industrial thickness clear plastic sheeting rapped and secured•Concrete floor slab 100mm thick with 6mm rebar, 30MPa strength•One end has 2 large steel piping plastic sheeted doors, also plastic sheeted. •Opposite side has 900mm x 2100mm inspection door.•Plenum chamber of 2 m wide separating wall panel, also needs to support the large fan•Total 3 gable plastic sheet wall gables (one per side and one in plenum chamber).•3 phase 3kW electric fan axial type 800mm diameter.•One blower 250W. Plastic vents along length of kiln•Thick tarpaulin 8 x 10m to cover entire stack of timber as baffling.•Outdoor spec electric box to house electric connection fitted on post.

Otsikko
Erän tunnistenumero: LOT-0018

9️⃣
Sisäinen tunniste: 2026-046214-LOT-009
Otsikko: Tool Grinder (planer and FJ cutter knives)
Hankinnan kuvaus:

•Type: Multi Function Tool Grinder for Woodworking Tools•Capacity: Minimum 600 mm planer blade length•Tool Types Supported: Planer/jointer knives, finger joint cutters, profile cutters (tongue and groove)•Angle Adjustment: 0°–90° adjustable grinding angles•Cooling System: Integrated coolant circulation to prevent overheating•Motor Power: Minimum 500 W, 2800 rpm grinding wheel•Safety Features: Emergency stop, protective guards•Training Suitability: Easy clamping system, vibration free operation, clear manuals•Support: Vendor must provide maintenance support

Otsikko
Erän tunnistenumero: LOT-0019

1️⃣0️⃣
Sisäinen tunniste: 2026-046214-LOT-0010
Otsikko: Dust extractor 4 bag
Hankinnan kuvaus:

•Number bags: 4•Power: 7.5Kw min, 3 phase•Filter surface: 10m2•Volume: 8000m3/hr•Air speed: 30m/min •Number bags: 2•Power: 7.5Kw min, 3 phase•Filter surface: 10m2•Volume: 8000m3/hr•Air speed: 30m/min

Otsikko
Erän tunnistenumero: LOT-0020

1️⃣1️⃣
Sisäinen tunniste: 2026-046214-LOT-0011
Otsikko: Briquette extruder
Hankinnan kuvaus:

•Type: Screw Briquette Extruder for Sawdust and Biomass•Motor Power: 33 kW•Briquette Profile: Hexagonal with hollow core•Raw Material: Dry sawdust, wood shavings, agricultural residues•Capacity: 400-500 kg/hour•Construction: Heavy duty steel frame, continuous duty design•Safety Features: Emergency stop, protective guards, smoke extraction port•Training Suitability: Easy operation, clear manuals, vendor training support and spare parts.

Otsikko
Erän tunnistenumero: LOT-0021

1️⃣2️⃣
Sisäinen tunniste: 2026-046214-LOT-0022
Otsikko: Tungsten Carbide Tip Circular saw maintenance tools
Hankinnan kuvaus:

•Type: Tungsten Carbide Tipping System for Circular Saw Blades•Blade Range: 400–1000 mm diameter circular saw blades.•System consists of three (3) machines and a package of specialised consumables:1.Induction Welding System: For removal and re welding of TCT tips onto blade body•Induction Power: Minimum 5–7 kW high frequency induction generator•Function: Removal of worn tips and welding of new tungsten carbide tips onto blade body•Cooling System: Integrated water cooling for induction coil and blade body•Precision: Accurate alignment system for tip seating and bonding2.Side grinder for equalising side clearance•Angle Adjustment: 0°–15° adjustable grinding angles•Motor Power: Minimum 2 kW grinding motor, high speed spindle•Cooling System: Integrated coolant circulation system•Safety Features: Emergency stop, protective guards, dust extraction port3.Face grinder for sharpening tooth face•Rake Angle Adjustment: 0°–25° adjustable grinding angles•Motor Power: Minimum 2 kW grinding motor, high speed spindle•Cooling System: Integrated coolant circulation system4.ConsumablesInduction welder brazing foils:•Supply of 5 kg of welding foils appropriate for TCT welding.•Composition: Silver alloy with copper, nickel, and/or manganese for strength and wetting•Form: Foil strips, thickness 0.1–0.5 mm, width 5–10 mm•Melting Range: 600–800 °C (depending on alloy)•Packaging: Supplied in rolls or strips, cuttable to size•Safety: Vendor must provide handling and safety data sheets (SDS)Tungsten carbide tips 500 pieces:•Grade: K20 •Hardness: 1,400–1,500 HV30 •Form: Rectangular tips, pre sized for blade tooth seats•Application: Rip sawing structural timber, softwood•Compatibility: Must fit induction brazing system specified in tender. Must fit saw blades specified.•Safety Standards: Compliant with EN/ISO woodworking tool safety requirementsCircular saw blades 2 pieces•1000mm diameter blade, 50mm bore, 60 teeth, 20-degree rake angle, pin hole 15mm, tooth profile seats available for TCT.•Compatibility: Must fit Slidetec sawmill. TCT supplied must fit onto blade.Grinding wheels:•3 diamond grinding wheels appropriate for side grinding TCT•3 diamond grinding wheels appropriate for face grinding TCTGeneral•Construction: Heavy duty steel frame, vibration free operation of all machines•Training Suitability: Easy operation, clear manuals, vendor training support•Safety Features: Emergency stop, protective guards, dust extraction port (grinder) for all machines

Hankinnan kuvaus

Otsikko
Erän tunnistenumero: LOT-0022

Menettely
Toimenpiteen tyyppi
Avoin menettely ✅
Oikeusperusta: Direktiivi 2014/24/EU
Hallinnolliset tiedot
Tarjousten tai osallistumishakemusten vastaanottamisen määräaika: 2026-05-15 23:59:00 📅
Tarjousten avaamista koskevat ehdot: 2026-05-18 12:00:00 📅
Kielet, joilla tarjoukset tai osallistumishakemukset voidaan jättää: englanti 🗣️
Vähimmäisaika, jonka kuluessa tarjoajan on pidettävä tarjous voimassa: 3 kuukautta
Tarjouspyynnön ehdot
Tarjousten avaamisen päivämäärä: 2026-05-18 12:00:00 📅
Sähköinen laskutus: Pakollinen
Sähköistä maksua käytetään ✅
Lisätietojen pyytämisen määräaika: 2026-05-01 23:59:00 📅
Myöntämisperusteet
Painotustyyppi: Painotus (pisteinä, tarkka)

Oikeudelliset, taloudelliset, rahoitukselliset ja tekniset tiedot
Osallistumisehdot
Tärkeimmät rahoitusehdot ja maksujärjestelyt ja/tai viittaus niitä koskeviin säännöksiin:

The Financial terms of the contract will be negotiated with the selected tenderer.

Hankintaviranomainen
Nimi ja osoitteet
Nimi: Niras Finland Oy
Kansallinen rekisterinumero: 0891018-0
Yksikkö: FORLAND Project
Postiosoite: Väritehtaankatu 8
Postinumero: 01300
Postitoimipaikka: Vantaa
Alue: Helsinki-Uusimaa 🏙️
Maa: Suomi 🇫🇮
Sähköposti: niras@niras.fi 📧
Puhelin: +35898362420 📞
URL: https://www.niras.com/offices/finland/ 🌏
Hankintaviranomaisen tyyppi
Julkisoikeudellinen yhteisö
Päätoimi
Ympäristö
Viestintä
Asiakirjojen URL-osoite: https://www.hankintailmoitukset.fi/en/public/procedure/30816/enotice/46214 🌏
Osallistumisen URL-osoite: https://www.hankintailmoitukset.fi/en/tendering/procedure/30816/call-for-tenders 🌏
Tarjouksen/hakemuksen jättäminen sähköisesti: Pakollinen

Täydentävät tiedot
Lisätietoja

The procurement will follow the Finnish law on Public procurement and when applicable, the General Terms Public Procurement for Finland. The procurement is binding to the contracting authority only when the contract has been signed.

Arvostelurunko
Nimi: The Market Court
Kansallinen rekisterinumero: FI30061576
Postiosoite: Radanrakentajantie 5
Postinumero: 00520
Postitoimipaikka: Helsinki
Alue: Helsinki-Uusimaa 🏙️
Maa: Suomi 🇫🇮
Sähköposti: markkinaoikeus@oikeus.fi 📧
Puhelin: +358 295643300 📞
URL: http://www.oikeus.fi/markkinaoikeus 🌏
Palvelu, josta voi saada tietoja uudelleentarkastelumenettelystä
Sama kuin: Nimi ja osoitteet
Tietoa sähköisistä työnkuluista
Sähköinen laskutus hyväksytään
Lähde: OJS 2026/S 072-252441 (2026-04-10)

Uudet hankinnat asiaan liittyvissä luokissa 🆕

Sähkökoneet, -kojeet, -laitteet ja -kulutustarvikkeet; valaistus (11 uudet hankinnat)