The HUS Group requests tenders for a device intended for measuring toe/ankle and upper arm blood pressure. The device will be used at the Vascular Surgery Outpatient Clinic (Arterial Laboratory). The Arterial Laboratory performs approximately 5000 ABI (ankle–brachial index) and finger pressure measurements annually. The ABI examination involves measuring blood pressure simultaneously from both upper arms and both ankles. Toe pressures must likewise be comparable with the upper arm pressure measured at the same time. The measurement protocol also includes recording a pulse volume waveform at ankle level. The same device is also used to measure finger pressures. The purpose of the procurement is to replace equipment reaching the end of its service life; therefore, the measurement results of the new device must be comparable with those produced by the devices currently in use in the Arterial Laboratory (Periflux system 6000 peripherial pressure premium). The procurement includes one (1) device and the consumables specific to the device. The procurement also includes the following options: - a maintenance agreement after the warranty period for each device, and - two (2) additional devices and the consumables spesific to the devices The contracting authority will decide on the use of the options by 31 December 2028. The estimated total value of the procurement (VAT 0%) is approximately EUR 300,000. This estimate includes the device, optional devices, device‑specific consumables, and the post‑warranty maintenance agreement. The contracting authority does not commit to the stated euro amounts or the consumption quantities presented in the request for quotation. Final order quantities may be higher or lower than indicated. This is a single procurement and has not been divided into lots. The equipment package constitutes a technically and functionally coherent whole, and dividing it into several procurements would not be appropriate. Splitting the procurement could jeopardize compatibility, functionality, and clarity of responsibilities, thereby significantly increasing risks related to implementation and maintenance. As this is an investment procurement, the Tenderer must commit to delivering the equipment (one) during the year 2026. The subject matter and requirements of the procurement are described in detail in the invitation to tender and its annexes including all key purchasing details.
Määräaika
Tarjousten vastaanottamisen määräaika oli 2026-10-30.
Hankinta julkaistiin 2026-09-29.
hankintailmoitus (2026-09-29) Kohde Hankinnan laajuus
Otsikko: Blood pressure monitor for toe/ankle and upper arm measurements
Viitenumero: HUS 154-2026
Lyhyt kuvaus:
The HUS Group requests tenders for a device intended for measuring toe/ankle and upper arm blood pressure. The device will be used at the Vascular Surgery Outpatient Clinic (Arterial Laboratory).
The Arterial Laboratory performs approximately 5000 ABI (ankle–brachial index) and finger pressure measurements annually. The ABI examination involves measuring blood pressure simultaneously from both upper arms and both ankles. Toe pressures must likewise be comparable with the upper arm pressure measured at the same time. The measurement protocol also includes recording a pulse volume waveform at ankle level. The same device is also used to measure finger pressures.
The purpose of the procurement is to replace equipment reaching the end of its service life; therefore, the measurement results of the new device must be comparable with those produced by the devices currently in use in the Arterial Laboratory (Periflux system 6000 peripherial pressure premium).
The procurement includes one (1) device and the consumables specific to the device. The procurement also includes the following options:
- a maintenance agreement after the warranty period for each device, and
- two (2) additional devices and the consumables spesific to the devices
The contracting authority will decide on the use of the options by 31 December 2028.
The estimated total value of the procurement (VAT 0%) is approximately EUR 300,000. This estimate includes the device, optional devices, device‑specific consumables, and the post‑warranty maintenance agreement. The contracting authority does not commit to the stated euro amounts or the consumption quantities presented in the request for quotation. Final order quantities may be higher or lower than indicated.
This is a single procurement and has not been divided into lots. The equipment package constitutes a technically and functionally coherent whole, and dividing it into several procurements would not be appropriate. Splitting the procurement could jeopardize compatibility, functionality, and clarity of responsibilities, thereby significantly increasing risks related to implementation and maintenance.
As this is an investment procurement, the Tenderer must commit to delivering the equipment (one) during the year 2026.
The subject matter and requirements of the procurement are described in detail in the invitation to tender and its annexes including all key purchasing details.
The HUS Group requests tenders for a device intended for measuring toe/ankle and upper arm blood pressure. The device will be used at the Vascular Surgery Outpatient Clinic (Arterial Laboratory).
The Arterial Laboratory performs approximately 5000 ABI (ankle–brachial index) and finger pressure measurements annually. The ABI examination involves measuring blood pressure simultaneously from both upper arms and both ankles. Toe pressures must likewise be comparable with the upper arm pressure measured at the same time. The measurement protocol also includes recording a pulse volume waveform at ankle level. The same device is also used to measure finger pressures.
The purpose of the procurement is to replace equipment reaching the end of its service life; therefore, the measurement results of the new device must be comparable with those produced by the devices currently in use in the Arterial Laboratory (Periflux system 6000 peripherial pressure premium).
The procurement includes one (1) device and the consumables specific to the device. The procurement also includes the following options:
- a maintenance agreement after the warranty period for each device, and
- two (2) additional devices and the consumables spesific to the devices
The contracting authority will decide on the use of the options by 31 December 2028.
The estimated total value of the procurement (VAT 0%) is approximately EUR 300,000. This estimate includes the device, optional devices, device‑specific consumables, and the post‑warranty maintenance agreement. The contracting authority does not commit to the stated euro amounts or the consumption quantities presented in the request for quotation. Final order quantities may be higher or lower than indicated.
This is a single procurement and has not been divided into lots. The equipment package constitutes a technically and functionally coherent whole, and dividing it into several procurements would not be appropriate. Splitting the procurement could jeopardize compatibility, functionality, and clarity of responsibilities, thereby significantly increasing risks related to implementation and maintenance.
As this is an investment procurement, the Tenderer must commit to delivering the equipment (one) during the year 2026.
The subject matter and requirements of the procurement are described in detail in the invitation to tender and its annexes including all key purchasing details.
Sopimustyyppi: Tavarat
Tuotteet/palvelut: Lääketieteelliset laitteet📦
Suorituspaikkaa koskevat rajoitukset: Missä tahansa tietyn maan alueella
Kuvaus
Sisäinen tunniste: HUS 154-2026
Tämä hankinta soveltuu myös pienille ja keskisuurille yrityksille (pk-yrityksille) ✅
Lisätietoja:
The procurement also includes the following options:
- a maintenance agreement after the warranty period for each device, and
- two (2) additional devices and the consumables spesific to the devices
The contracting authority will decide on the use of the options by 31 December 2028.
The procurement also includes the following options:
- a maintenance agreement after the warranty period for each device, and
- two (2) additional devices and the consumables spesific to the devices
The contracting authority will decide on the use of the options by 31 December 2028.
Lähestymistapa ympäristövaikutusten vähentämiseen: Siirtyminen kiertotalouteen
Edistettävä sosiaalinen tavoite: Ihmisoikeuksia koskeva due diligence -velvoite maailmanlaajuisissa toimitusketjuissa
Maa: Suomi 🇫🇮
Kesto: 24 kuukautta Kesto
Aloituspäivä: 2026-11-11 📅
Myöntämisperusteet
Hinta ✅
Hinta (painotus): 65
Laatukriteeri (nimi): Laatu
Laatukriteeri (painotus): 35
Otsikko
Erän tunnistenumero: LOT-0000
Menettely Toimenpiteen tyyppi
Avoin menettely ✅
Oikeusperusta: Direktiivi 2014/24/EU
Menettelyn tärkeimmät piirteet:
The procurement is governed by the Act on Public Procurement and Concession Contracts (1397/2016, the Procurement Act). This procurement exceeds the EU threshold value, and the procurement procedure applied is an open procedure as referred to in Section 32 of the Procurement Act.
PROCESSING OF TENDERS
The stages of the procedure are as follows:
1. The Contracting Authority opens the tenders
2. Checks the suitability responses of the tenderers
3. Checks the compliance of the tenders with the request for quotation
4. Compares the tenders
5. Makes the procurement decision and notifies all tenderers
6. Requests and verifies the certificates and reports concerning the suitability of the winning tenderer(s)
7. Concludes the contract with the selected tenderer(s).
LANGUAGE TO BE USED IN THE TENDERING PROCESS
The procurement documents are available in Finnish and English, with the request for quotation and draft contract provided in English and the other documents in Finnish. If a tenderer requires the documents in another language, the tenderer is responsible for arranging and paying for the translation. Tenders must be submitted in either English or Finnish.
ALTERNATIVE TENDERS
Alternative tenders are not permitted.
PARTIAL TENDERS
Partial tenders are not permitted
The procurement is governed by the Act on Public Procurement and Concession Contracts (1397/2016, the Procurement Act). This procurement exceeds the EU threshold value, and the procurement procedure applied is an open procedure as referred to in Section 32 of the Procurement Act.
PROCESSING OF TENDERS
The stages of the procedure are as follows:
1. The Contracting Authority opens the tenders
2. Checks the suitability responses of the tenderers
3. Checks the compliance of the tenders with the request for quotation
4. Compares the tenders
5. Makes the procurement decision and notifies all tenderers
6. Requests and verifies the certificates and reports concerning the suitability of the winning tenderer(s)
7. Concludes the contract with the selected tenderer(s).
LANGUAGE TO BE USED IN THE TENDERING PROCESS
The procurement documents are available in Finnish and English, with the request for quotation and draft contract provided in English and the other documents in Finnish. If a tenderer requires the documents in another language, the tenderer is responsible for arranging and paying for the translation. Tenders must be submitted in either English or Finnish.
ALTERNATIVE TENDERS
Alternative tenders are not permitted.
PARTIAL TENDERS
Partial tenders are not permitted
Hallinnolliset tiedot
Tarjousten tai osallistumishakemusten vastaanottamisen määräaika: 2026-10-30 10:00:00 📅
Tarjousten avaamista koskevat ehdot: 2026-10-30 10:01:00 📅
Kielet, joilla tarjoukset tai osallistumishakemukset voidaan jättää: suomi 🗣️
Vähimmäisaika, jonka kuluessa tarjoajan on pidettävä tarjous voimassa: 9 kuukautta Tarjouspyynnön ehdot
Tarjoaja voi jättää useamman kuin yhden tarjouksen
Tarjousten avaamisen päivämäärä: 2026-10-30 10:01:00 📅
Sähköinen laskutus: Pakollinen
Sähköistä tilaamista käytetään ✅
Sähköistä maksua käytetään ✅
Lisätietojen pyytämisen määräaika: 2026-10-09 06:00:00 📅
Myöntämisperusteet
Painotustyyppi: Painotus (prosentteina, tarkka)
Tarjouspyynnön ehdot
Sopimukseen sisältyy suoritusehtoja ✅
Oikeudelliset, taloudelliset, rahoitukselliset ja tekniset tiedot Sopimukseen liittyvät ehdot
Sopimuksen täytäntöönpanoehdot:
EU-kynnysarvon ylittävässä hankinnassa hankintasopimus voidaan tehdä aikaisintaan 14 päivän kuluttua siitä, kun tarjoaja on saanut tai hänen katsotaan saaneen päätös perusteluineen tiedoksi.
Sopimus ei synny hankintapäätöksellä, vaan vasta vasta kirjallisen sopimuksen allekirjoittamisella.
Sopimusehdot ovat tarjouspyynnön liitteenä. Tarjoajan on hyväksyttävä sopimusehdot sellaisenaan ilman varaumia.
Sopimusluonnos on tarjoajaa sitova, eikä sopimusehdoista neuvotella hankintapäätöksen tekemisen jälkeen.
Sopimusluonnokseen voidaan tehdä ainoastaan molempien osapuolten hyväksymiä vähäisiä täsmennyksiä. HUSilla ei ole
velvollisuutta tarjoajan ehdottamien täsmennysten hyväksymiseen, ja tarjoajan tulee allekirjoittaa sopimus sellaisenaan, jos HUS niin vaatii.
Sopimuskauden arvioitu alkamisajankohta on x.x.
EU-kynnysarvon ylittävässä hankinnassa hankintasopimus voidaan tehdä aikaisintaan 14 päivän kuluttua siitä, kun tarjoaja on saanut tai hänen katsotaan saaneen päätös perusteluineen tiedoksi.
Sopimus ei synny hankintapäätöksellä, vaan vasta vasta kirjallisen sopimuksen allekirjoittamisella.
Sopimusehdot ovat tarjouspyynnön liitteenä. Tarjoajan on hyväksyttävä sopimusehdot sellaisenaan ilman varaumia.
Sopimusluonnos on tarjoajaa sitova, eikä sopimusehdoista neuvotella hankintapäätöksen tekemisen jälkeen.
Sopimusluonnokseen voidaan tehdä ainoastaan molempien osapuolten hyväksymiä vähäisiä täsmennyksiä. HUSilla ei ole
velvollisuutta tarjoajan ehdottamien täsmennysten hyväksymiseen, ja tarjoajan tulee allekirjoittaa sopimus sellaisenaan, jos HUS niin vaatii.
The procurement also includes the following options:
- a maintenance agreement after the warranty period for each device, and
- two (2) additional devices and the consumables spesific to the devices
The contracting authority will decide on the use of the options by 31 December 2028.
The procurement also includes the following options:
- a maintenance agreement after the warranty period for each device, and
- two (2) additional devices and the consumables spesific to the devices
The contracting authority will decide on the use of the options by 31 December 2028.
Arvostelurunko
Nimi: Markkinaoikeus
Kansallinen rekisterinumero: 3006157-6
Postiosoite: Radanrakentajantie 5
Postinumero: 00520
Postitoimipaikka: Helsinki
Alue: Helsinki-Uusimaa
🏙️
Maa: Suomi 🇫🇮
Sähköposti: markkinaoikeus@oikeus.fi📧
Puhelin: +358 295643300📞
URL: http://www.oikeus.fi/markkinaoikeus🌏 Palvelu, josta voi saada tietoja uudelleentarkastelumenettelystä Sama kuin: Arvostelurunko Uudelleentarkastelumenettely
Tarkat tiedot uudelleentarkastelumenettelyjen määräajasta (määräajoista):
Muutoksenhakumenettelyn määräaikoja koskevat tarkat tiedot ilmoitetaan hankintapäätöksessä.