The Finnish Border Guard (later Contracting authority, Buyer) requests tenders for AS332 Component maintenance services in accordance with the terms of this Call for Tenders and it's appendices. The subject of the procurement is to provide maintenance services for removed components due to overhaul, scheduled inspection, defect rectification or repair, as described in the AS332 Master Servicing Manual and Airworthiness Limitation Section. The procurement is divided into two lots based on the function of the components. These lots consist of: 1.) Overhaul for Main&tail Rotor Servo Actuator, P/N SC7202, SC7203-1 and SC7251, interval 3000 FH or 20 years 2.) Overhaul for Hydraulic Pump, P/N C24160045-1, C24160045-100, C24160045-200, C24160046-1, C24160046-100 & C24160046-200, interval 3000 FH Estimated quantities of components being serviced are presented in the description of each lot. Each of the lots has unforeseen and unscheduled repair, maintenance and modification services during the contract period as an option.
Määräaika
Tarjousten vastaanottamisen määräaika oli 2026-02-01.
Hankinta julkaistiin 2025-12-17.
hankintailmoitus (2025-12-17) Kohde Hankinnan laajuus
Otsikko: AS332 L1 Component Maintenance Services
Viitenumero: RVLDno 2025-1262
Lyhyt kuvaus:
“The Finnish Border Guard (later Contracting authority, Buyer) requests tenders for AS332 Component maintenance services in accordance with the terms of this...”
Lyhyt kuvaus
The Finnish Border Guard (later Contracting authority, Buyer) requests tenders for AS332 Component maintenance services in accordance with the terms of this Call for Tenders and it's appendices.
The subject of the procurement is to provide maintenance services for removed components due to overhaul, scheduled inspection, defect rectification or repair, as described in the AS332 Master Servicing Manual and Airworthiness Limitation Section.
The procurement is divided into two lots based on the function of the components.
These lots consist of:
1.) Overhaul for Main&tail Rotor Servo Actuator, P/N SC7202, SC7203-1 and SC7251, interval 3000 FH or 20 years
2.) Overhaul for Hydraulic Pump, P/N C24160045-1, C24160045-100, C24160045-200, C24160046-1, C24160046-100 & C24160046-200, interval 3000 FH
Estimated quantities of components being serviced are presented in the description of each lot.
Each of the lots has unforeseen and unscheduled repair, maintenance and modification services during the contract period as an option.
Näytä lisää
Sopimustyyppi: Palvelut
Tuotteet/palvelut: Helikoptereiden korjaus ja huolto📦 Tietoa eristä
Tämä sopimus on jaettu osiin ✅
Yhdelle tarjoajalle myönnettävien erien enimmäismäärä: 2
Tarjouksia voidaan jättää enintään yhtä erää varten: 2
1️⃣
Hankinnan kuvaus:
“The subject of procurement is the Overhaul for Main&tail Rotor Servo Actuator, P/N SC7202, SC7203-1 and SC7251, interval 3000 FH or 20 years and as an...”
Hankinnan kuvaus
The subject of procurement is the Overhaul for Main&tail Rotor Servo Actuator, P/N SC7202, SC7203-1 and SC7251, interval 3000 FH or 20 years and as an option unforeseen and unscheduled repair, maintenance, and modification services during the contract period.
The estimated amount of components overhauled is 5 pieces of part number SC7202, 4 pieces of part number SC7203-1 and 3 pieces of part number SC7251 within the contract period. This may vary by a few pieces.
Näytä lisää Kesto
Aloituspäivä: 2026-01-30 📅
Loppupäivä: 2029-12-31 📅
Myöntämisperusteet
Hinta ✅
Hinta (painotus): 90
Laatukriteeri (nimi): Turnaround time
Laatukriteeri (painotus): 10
Otsikko
Erän tunnistenumero: LOT-0001
2️⃣
Hankinnan kuvaus:
“The subject of procurement is the Overhaul for Hydraulic Pump, P/N C24160045-1, C24160045-100, C24160045-200, C24160046-1, C24160046-100 & C24160046-200,...”
Hankinnan kuvaus
The subject of procurement is the Overhaul for Hydraulic Pump, P/N C24160045-1, C24160045-100, C24160045-200, C24160046-1, C24160046-100 & C24160046-200, interval 3000 FH and as an option unforeseen and unscheduled repair, maintenance, and modification services during the contract period.
The estimated amount of parts overhauled is 7 pieces within the contract period. This may vary by few pieces.
Menettely Toimenpiteen tyyppi
Avoin menettely ✅ Hallinnolliset tiedot
Tarjousten tai osallistumishakemusten vastaanottamisen määräaika: 2026-02-01 21:59:00 📅
Tarjousten avaamista koskevat ehdot: 2026-02-02 08:00:00 📅
Kielet, joilla tarjoukset tai osallistumishakemukset voidaan jättää: englanti 🗣️
Vähimmäisaika, jonka kuluessa tarjoajan on pidettävä tarjous voimassa: 6
Oikeudelliset, taloudelliset, rahoitukselliset ja tekniset tiedot Osallistumisehdot
Luettelo ja lyhyt kuvaus säännöistä ja kriteereistä:
“The tenderer shall hold an applicable and valid EASA Part 145 approval (maintenance organisation approval certificate with maintenance organisation approval...”
Luettelo ja lyhyt kuvaus säännöistä ja kriteereistä
The tenderer shall hold an applicable and valid EASA Part 145 approval (maintenance organisation approval certificate with maintenance organisation approval schedule) and list of component capabilities.
Näytä lisää
Luettelo ja lyhyt kuvaus säännöistä ja kriteereistä:
“The tenderer shall attach a valid EASA form 1 or equivalent dual release to each delivery of goods to the Buyer.”
Luettelo ja lyhyt kuvaus säännöistä ja kriteereistä:
“The tenderer shall hold a valid ISO 9001:2015 quality management systems certificate, or equivalent.”
Täydentävät tiedot Arvostelurunko
Nimi: Markkinaoikeus
Kansallinen rekisterinumero: 3006157-6
Postiosoite: Radanrakentajantie 5
Postinumero: 00520
Postitoimipaikka: Helsinki
Alue: Helsinki-Uusimaa🏙️
Maa: Suomi 🇫🇮
Sähköposti: markkinaoikeus@oikeus.fi📧
Puhelin: +358 295643300📞
URL: http://www.oikeus.fi/markkinaoikeus🌏 Uudelleentarkastelumenettely
Tarkat tiedot uudelleentarkastelumenettelyjen määräajasta (määräajoista):
“A concerned party should file a claim for rectification of procurement no later
than 14 days after receiving notice of the decision made by the Contracting...”
Tarkat tiedot uudelleentarkastelumenettelyjen määräajasta (määräajoista)
A concerned party should file a claim for rectification of procurement no later
than 14 days after receiving notice of the decision made by the Contracting Entity or some
other decision that is part of the procurement procedure. The actual day of notice will not be
included in this period. The request must be submitted to the contracting entity within the office hours of the contracting entity (16.15). If the last day for the submission of the request is a bank holiday, the Independence Day (6 December), the First of May, Christmas Eve, Midsummer Eve or a Saturday, the request may be submitted on the first weekday following that day
Näytä lisää Tietoa sähköisistä työnkuluista
Sähköinen laskutus hyväksytään
Sähköistä tilaamista käytetään
Sähköistä maksua käytetään
Lähde: OJS 2025/S 244-841760 (2025-12-17)