SCOPE OF THE PROJECT: Hyvinkään Lämpövoima Oy ("Contracting Entity") has a need for a PTES heat storage. The PTES heat storage construction project ("Project") includes at least the following subareas which are procured separately: - Excavation works and civil engineering works of the PTES heat storage, - Engineering works consisting of e.g. mechanical works, process heat works, electrical works, piping works, pump works, heat transfer works on related procurement, - Installation and engineering works for welded earth-facing sealing and protective membrane structures, and - Design and installation of the lid structure (this "Procurement"). SCOPE OF THE PROCUREMENT: The scope of this Procurement is the design and installation of the lid structure for PTES heat storage in fully operational condition (Turnkey delivery). The awarded contractor will be responsible for at least (but not limited): - Complete detail planning of the lid structure, - Project management and coordination with the Contracting Entity and other contractors at the site, - Delivery, assembly, welding and installation of the lid structure and materials/components included, - Electrotechnical installations of the lid structure, - Documentation and quality assurance, and - Testing of the lid structure. The lid structure must be designed/planned, prepared, delivered, tested, commissioned, and documented in accordance with the overall tender material (documentation of the Call for Tenders and documentation provided by Tenderer). The Scope of the Procurement is described in more detail in the appendices of the Call for Tenders. As stated above, the Procurement is one of the subareas of the Project. The Procurement contract for the Procurement is a subcontract subordinated under the PTES heat storage excavation works contract. The contractor of the excavation works contract will act as the main contractor. The main contractor is responsible for the construction site management and on-site services. The tender documents for the main contract are available at (in Finnish): https://www.hankintailmoitukset.fi/fi/public/procedure/8711/enotice/12751/ GENERAL INFORMATION OF THE PTES HEAT STORAGE: PTES pit thermal energy storage has the following technical characteristics: - Water volume is approximately 380 000 cubic meters, - Water height is 20 meters, - Surface area of the heat storage area including outer rails is approximately 67 700 square meters, - Surface area of the lid structure is approximately 37 250 square meters, - Basal area of the heat storage is approximately 8125 square meters, and - Inner slopes surface area is approximately 31 300 square meters and their slope is 1:2,5. PTES heat storage is located in a groundwater area. The construction site is located in Kulomäki old gravel pit in Hyvinkää.
Määräaika
Tarjousten vastaanottamisen määräaika oli 2024-11-12.
Hankinta julkaistiin 2024-10-12.
hankintailmoitus (2024-10-12) Kohde Hankinnan laajuus
Otsikko: Lid design and construction - PTES heat storage Hyvinkää, Finland
Lyhyt kuvaus:
SCOPE OF THE PROJECT:
Hyvinkään Lämpövoima Oy ("Contracting Entity") has a need for a PTES heat storage. The PTES heat storage construction project ("Project") includes at least the following subareas which are procured separately:
- Excavation works and civil engineering works of the PTES heat storage,
- Engineering works consisting of e.g. mechanical works, process heat works, electrical works, piping works, pump works, heat transfer works on related procurement,
- Installation and engineering works for welded earth-facing sealing and protective membrane structures, and
- Design and installation of the lid structure (this "Procurement").
SCOPE OF THE PROCUREMENT:
The scope of this Procurement is the design and installation of the lid structure for PTES heat storage in fully operational condition (Turnkey delivery). The awarded contractor will be responsible for at least (but not limited):
- Complete detail planning of the lid structure,
- Project management and coordination with the Contracting Entity and other contractors at the site,
- Delivery, assembly, welding and installation of the lid structure and materials/components included,
- Electrotechnical installations of the lid structure,
- Documentation and quality assurance, and
- Testing of the lid structure.
The lid structure must be designed/planned, prepared, delivered, tested, commissioned, and documented in accordance with the overall tender material (documentation of the Call for Tenders and documentation provided by Tenderer). The Scope of the Procurement is described in more detail in the appendices of the Call for Tenders.
As stated above, the Procurement is one of the subareas of the Project.
The Procurement contract for the Procurement is a subcontract subordinated under the PTES heat storage excavation works contract. The contractor of the excavation works contract will act as the main contractor. The main contractor is responsible for the construction site management and on-site services.
The tender documents for the main contract are available at (in Finnish):
https://www.hankintailmoitukset.fi/fi/public/procedure/8711/enotice/12751/
GENERAL INFORMATION OF THE PTES HEAT STORAGE:
PTES pit thermal energy storage has the following technical characteristics:
- Water volume is approximately 380 000 cubic meters,
- Water height is 20 meters,
- Surface area of the heat storage area including outer rails is approximately 67 700 square meters,
- Surface area of the lid structure is approximately 37 250 square meters,
- Basal area of the heat storage is approximately 8125 square meters, and
- Inner slopes surface area is approximately 31 300 square meters and their slope is 1:2,5.
PTES heat storage is located in a groundwater area.
The construction site is located in Kulomäki old gravel pit in Hyvinkää.
Hyvinkään Lämpövoima Oy ("Contracting Entity") has a need for a PTES heat storage. The PTES heat storage construction project ("Project") includes at least the following subareas which are procured separately:
- Excavation works and civil engineering works of the PTES heat storage,
- Engineering works consisting of e.g. mechanical works, process heat works, electrical works, piping works, pump works, heat transfer works on related procurement,
- Installation and engineering works for welded earth-facing sealing and protective membrane structures, and
- Design and installation of the lid structure (this "Procurement").
SCOPE OF THE PROCUREMENT:
The scope of this Procurement is the design and installation of the lid structure for PTES heat storage in fully operational condition (Turnkey delivery). The awarded contractor will be responsible for at least (but not limited):
- Complete detail planning of the lid structure,
- Project management and coordination with the Contracting Entity and other contractors at the site,
- Delivery, assembly, welding and installation of the lid structure and materials/components included,
- Electrotechnical installations of the lid structure,
- Documentation and quality assurance, and
- Testing of the lid structure.
The lid structure must be designed/planned, prepared, delivered, tested, commissioned, and documented in accordance with the overall tender material (documentation of the Call for Tenders and documentation provided by Tenderer). The Scope of the Procurement is described in more detail in the appendices of the Call for Tenders.
As stated above, the Procurement is one of the subareas of the Project.
The Procurement contract for the Procurement is a subcontract subordinated under the PTES heat storage excavation works contract. The contractor of the excavation works contract will act as the main contractor. The main contractor is responsible for the construction site management and on-site services.
The tender documents for the main contract are available at (in Finnish):
PTES pit thermal energy storage has the following technical characteristics:
- Water volume is approximately 380 000 cubic meters,
- Water height is 20 meters,
- Surface area of the heat storage area including outer rails is approximately 67 700 square meters,
- Surface area of the lid structure is approximately 37 250 square meters,
- Basal area of the heat storage is approximately 8125 square meters, and
- Inner slopes surface area is approximately 31 300 square meters and their slope is 1:2,5.
PTES heat storage is located in a groundwater area.
The construction site is located in Kulomäki old gravel pit in Hyvinkää.
Sopimustyyppi: Urakat
Tuotteet/palvelut: Rakennustyöt📦
Arvioitu arvo ilman arvonlisäveroa: 7 800 000 EUR 💰
Kuvaus
Sisäinen tunniste: 2024-013538-LOT-0001
Lisätietoja:
VARIANT TENDERS:
Contracting Entity accepts and encourages Tenderers to submit two (2) variant tenders as described below in this section.
Tenderer may submit two (2) variant tenders with two (2) alternative U-values: 1) U-value of maximum 0.1 W/(m2K), and 2) U-value of maximum 0.15 W/(m2K).
Submitting any other variant tender is prohibited.
Tenders will first be evaluated and compared on the basis of a U-value of 0.1 W/(m2K). If the price of all acceptable tenders exceeds estimated value of the Procurement contract (8.000.000 €), then tenders will be evaluated and compared secondly on the basis of a U-value of 0.15 W/(m2K).
Tenderer's failure to submit alternative tenders may adversely affect Tenderer's position in the competitive tendering and procurement process. Therefore, Contracting Entity encourages all tenderers to submit their tenders with both U-values (0,1 W/m2K and 0,15 W/m2K).
LID DESIGN:
Tenderers may submit their tender with a) Ramboll's lid design solution, OR b) with their own or third party lid design solution.
Tenderers may modify and/or amend Ramboll's lid design solution before submitting their tender. Ramboll's lid design solution is attached to the Call for Tenders.
Contracting Entity accepts and encourages Tenderers to submit two (2) variant tenders as described below in this section.
Tenderer may submit two (2) variant tenders with two (2) alternative U-values: 1) U-value of maximum 0.1 W/(m2K), and 2) U-value of maximum 0.15 W/(m2K).
Submitting any other variant tender is prohibited.
Tenders will first be evaluated and compared on the basis of a U-value of 0.1 W/(m2K). If the price of all acceptable tenders exceeds estimated value of the Procurement contract (8.000.000 €), then tenders will be evaluated and compared secondly on the basis of a U-value of 0.15 W/(m2K).
Tenderer's failure to submit alternative tenders may adversely affect Tenderer's position in the competitive tendering and procurement process. Therefore, Contracting Entity encourages all tenderers to submit their tenders with both U-values (0,1 W/m2K and 0,15 W/m2K).
LID DESIGN:
Tenderers may submit their tender with a) Ramboll's lid design solution, OR b) with their own or third party lid design solution.
Tenderers may modify and/or amend Ramboll's lid design solution before submitting their tender. Ramboll's lid design solution is attached to the Call for Tenders.
Lähestymistapa ympäristövaikutusten vähentämiseen: Siirtyminen kiertotalouteen
Edistettävä sosiaalinen tavoite: Oikeudenmukaiset työolot
Innovaatiohankinnat: Hankitut urakat, tavarat tai palvelut ovat uusia tai huomattavia parannuksia verrattuna jo markkinoilla oleviin urakoihin, tavaroihin tai palveluihin.
Pääkohde tai suorituspaikka: Kulomäki Old gravel pit, Hyvinkää.
Postiosoite: Pohjoinen yhdystie 98
Postinumero: 05880
Postitoimipaikka: Hyvinkää
Maa: Suomi 🇫🇮
Suorituspaikka: Helsinki-Uusimaa🏙️
Sopimuksen optiokausien enimmäismäärä: 0
Lisätietoja uusimisesta: The Procurement contract does not include option periods.
Tietoa vaihtoehdoista
Vaihtoehdot ✅
Vaihtoehtojen kuvaus: This Procurement does not include options.
Tietoa muunnelmista
Vaihtoehdot hyväksytään ✅ Myöntämisperusteet
Hinta ✅
Laatukriteeri (nimi): Quality
Otsikko
Erän tunnistenumero: LOT-0000
Menettely Toimenpiteen tyyppi
Avoin menettely ✅
Oikeusperusta: Direktiivi 2014/25/EU
Menettelyn tärkeimmät piirteet:
The procurement procedure shall be carried out with open procedure in accordance with the Section 36 of the Finnish Procurement Act for Special Sectors (1398/2016, "Procurement Act for Special Sector"). The Procurement Act for Special Sectors shall be applied to the procurement.
The procurement procedure shall be carried out with open procedure in accordance with the Section 36 of the Finnish Procurement Act for Special Sectors (1398/2016, "Procurement Act for Special Sector"). The Procurement Act for Special Sectors shall be applied to the procurement.
Hallinnolliset tiedot
Tarjousten tai osallistumishakemusten vastaanottamisen määräaika: 2024-11-12 12:00:00 📅
Tarjousten avaamista koskevat ehdot: 2024-11-12 12:15:00 📅
Tarjousten avaamista koskevat ehdot (paikka): The tenders will be opened after the deadline for their submission. The opening session of the tenders is not public.
Kielet, joilla tarjoukset tai osallistumishakemukset voidaan jättää: englanti 🗣️
Vähimmäisaika, jonka kuluessa tarjoajan on pidettävä tarjous voimassa: 6 kuukautta Tarjouspyynnön ehdot
Tarjoaja voi jättää useamman kuin yhden tarjouksen
Vakuus vaaditaan ✅
Hankintasopimuksen toteuttamiseen osoitetun henkilöstön nimet ja ammatillinen pätevyys on ilmoitettava
Tarjousten avaamisen päivämäärä: 2024-11-12 12:15:00 📅
Paikka:
The tenders will be opened after the deadline for their submission. The opening session of the tenders is not public.
Sähköinen laskutus: Pakollinen
Sähköistä maksua käytetään ✅
Lisätietojen pyytämisen määräaika: 2024-10-24 12:00:00 📅
Sopimukseen sisältyy suoritusehtoja ✅
Oikeudelliset, taloudelliset, rahoitukselliset ja tekniset tiedot Osallistumisehdot
Luettelo ja lyhyt kuvaus olosuhteista:
Suitability to pursue the professional activity - Enrolment in a trade register: The Tenderer is registered in the trade register or a similar register. The Tenderer undertakes, upon request, to provide a proof of registration.
Tekninen ja ammatillinen pätevyys
Luettelo ja lyhyt kuvaus valintaperusteista:
Technical and professional ability - References: Tenderer shall meet the requirements set out in the Appendix “References”. Tenderer must fill in the Appendix “References” and attach it to its tender.
If the tender is submitted as a group, the members of the group may meet the requirements together.
If Tenderer uses the resources of other units (resource units) to meet the requirements, Tenderer, together with its resource units, may meet the requirements.
If Tenderer relies on the resources of the resource unit to fulfil the suitability requirements set out in this section, the resources of the resource unit must be available for providing the designing and/or works under the Procurement contract.
E.g., if Tenderer has appointed the resource unit whose lid design experience has been relied in the appendix "References", then the resource unit must be able to provide design services under the Procurement contract.
Technical and professional ability - References: Tenderer shall meet the requirements set out in the Appendix “References”. Tenderer must fill in the Appendix “References” and attach it to its tender.
If the tender is submitted as a group, the members of the group may meet the requirements together.
If Tenderer uses the resources of other units (resource units) to meet the requirements, Tenderer, together with its resource units, may meet the requirements.
If Tenderer relies on the resources of the resource unit to fulfil the suitability requirements set out in this section, the resources of the resource unit must be available for providing the designing and/or works under the Procurement contract.
E.g., if Tenderer has appointed the resource unit whose lid design experience has been relied in the appendix "References", then the resource unit must be able to provide design services under the Procurement contract.
Taloudellinen ja rahoituksellinen asema
Tenderer's turnover: Tenderer's total annual turnover is at least 10.000.000 € for the last financial year (12-month notional period).
Upon Contracting Entity's request, Tenderer shall provide information on turnover for at least the last financial year, if Tenderer is entitled to provide it under the law of his country of establishment.
If Tenderer does not have a financial year, Tenderer may prove its economic and financial standing by any other document approved by Contracting Entity.
If the application is submitted as a group, the members of the group may meet the requirement together.
If Tenderer uses the resources of other units (resource units) to meet the requirement, Tenderer together with its resource units, may meet the requirement. If Tenderer relies on the capacities of resource units to satisfy suitability requirements of this section, Tenderer must provide documentation which proves that the resource unit shall be jointly liable for the performance under the Procurement contract.
Tenderer's turnover: Tenderer's total annual turnover is at least 10.000.000 € for the last financial year (12-month notional period).
Upon Contracting Entity's request, Tenderer shall provide information on turnover for at least the last financial year, if Tenderer is entitled to provide it under the law of his country of establishment.
If Tenderer does not have a financial year, Tenderer may prove its economic and financial standing by any other document approved by Contracting Entity.
If the application is submitted as a group, the members of the group may meet the requirement together.
If Tenderer uses the resources of other units (resource units) to meet the requirement, Tenderer together with its resource units, may meet the requirement. If Tenderer relies on the capacities of resource units to satisfy suitability requirements of this section, Tenderer must provide documentation which proves that the resource unit shall be jointly liable for the performance under the Procurement contract.
Osallistumisehdot
Vaadittavat vakuudet ja takuut: Please see appendices of the Call for Tenders.
Tärkeimmät rahoitusehdot ja maksujärjestelyt ja/tai viittaus niitä koskeviin säännöksiin: Please see appendices of the Call for Tenders.
Sopimukseen liittyvät ehdot
Sopimuksen täytäntöönpanoehdot:
General Conditions for the Supply and Erection of Machinery and other Mechanical, Electrical and Electronic Equipment (NLM 19) as well as the delivery-specific terms and conditions defined by Contracting Entity shall be applied in the Procurement contract.
General Conditions for the Supply and Erection of Machinery and other Mechanical, Electrical and Electronic Equipment (NLM 19) as well as the delivery-specific terms and conditions defined by Contracting Entity shall be applied in the Procurement contract.
Osallistumisehdot
Poissulkemisperuste:
Ennenaikainen irtisanominen, vahingonkorvaukset tai muut vastaavat seuraamukset
Järjestelyt velkojien kanssa
Kansallisesta lainsäädännöstä johtuva konkurssia tai muuta sellaista vastaava tilanne
Syyllistyminen väärien tietojen antamiseen, tietojen antamatta jättämiseen, vaadittujen asiakirjojen antamiseen kykenemättömien tietojen toimittamiseen ja tätä menettelyä koskevien luottamuksellisten tietojen antamiseen
Talouden toimijan hankintamenettelyyn osallistumisesta johtuvat eturistiriidat
Terrorismirikokset tai terroritoimintaan liittyvät rikokset
Toisten talouden toimijoiden kanssa kilpailun vääristämiseksi tehdyt sopimukset
The tenderer itself or any person who is a member of its administrative, management or supervisory body or has powers of representation, decision or control therein…
… been the subject of a conviction by final judgment for participation in a criminal organisation, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable.
… has been the subject of a conviction by final judgment for, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable.
… been the subject of a conviction by final judgment for fraud, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable.
… has been the subject of a conviction by final judgment for terrorist offences or offences linked to terrorist activities, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable.
… has been the subject of a conviction by final judgment for money laundering or terrorist financing, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable.
… has been the subject of a conviction by final judgment for child labour and other forms of trafficking in human beings, by a conviction rendered at the most five years ago or in which an exclusion period set out directly in the conviction continues to be applicable
The tenderer has breached its obligations to pay…
… taxes in the country of its establishment or in the country of the buyer.
… social security contributions in the country of its establishment or in the country of the buyer.
The tenderer has breached the following obligations defined in the Finnish criminal code: violation of the right to organise, work hour offence, extortionate work discrimination, work discrimination, work safety offence or the use of unauthorised foreign labour.
The tenderer has breached the following obligations defined in the Finnish criminal code: violation of the right to organise, work hour offence, extortionate work discrimination, work discrimination, work safety offence or the use of unauthorised foreign labour.
The tenderer has breached its obligations in the field of…
… environmental law.
… social law.
… labour law.
The participation of the tenderer in the procurement procedure gives rise to conflicts of interest.
The tenderer, or any undertaking related to it, has advised the buyer or otherwise been involved in the preparation of the procurement procedure.
The tenderer's previous contracts or concessions have been terminated prematurely or damages or other similar penalties have been claimed in connection with the contracts in question.
The tenderer is in one of the following situations.
a) It has misrepresented information in relation to the exclusion or selection criteria,
b) It has withheld such information,
c) It has delayed to submit the supporting information required by a buyer, or
d) It has tried to influence the decision making process of the buyer, to obtain confidential information that may confer upon it undue advantages in the procurement procedure or to negligently provide misleading information that may have a material influence on decisions concerning exclusion, selection or award.
The tenderer is in one of the following situations.
a) It has misrepresented information in relation to the exclusion or selection criteria,
b) It has withheld such information,
c) It has delayed to submit the supporting information required by a buyer, or
d) It has tried to influence the decision making process of the buyer, to obtain confidential information that may confer upon it undue advantages in the procurement procedure or to negligently provide misleading information that may have a material influence on decisions concerning exclusion, selection or award.
The tenderer is bankrupt.
The tenderer is subject of insolvency or winding-up.
The tenderer is in arrangement with creditors.
The tenderer is in any analogous situation like bankruptcy arising from a similar procedure under national laws and regulations.
The assets of the tenderer are being administered by a liquidator or by the court.
The business activities of the tenderer are suspended.
The tenderer is guilty of grave professional misconduct.
The tenderer has entered into agreements aimed at distorting competition.
Suspension of the procurement procedure:
Contracting Entity has the right to suspend the procurement procedure for a real and legitimate reason. Contracting Entity reserves the right to suspend the procurement procedure at least (but not limited) in the following situations:
- Contracting Entity has not received any admissible tenders to this procurement or any other procurement included in the Project,
- If Contracting Entity does not obtain the necessary permits, such as water permits,
to carry out the procurement on time,
- Tendered prices exceed the estimated value of the Procurement contract, or
- If the procurement is not granted an investment decision.
Contracting Entity has the right to suspend the procurement procedure for a real and legitimate reason. Contracting Entity reserves the right to suspend the procurement procedure at least (but not limited) in the following situations:
- Contracting Entity has not received any admissible tenders to this procurement or any other procurement included in the Project,
- If Contracting Entity does not obtain the necessary permits, such as water permits,
to carry out the procurement on time,
- Tendered prices exceed the estimated value of the Procurement contract, or
- If the procurement is not granted an investment decision.
Arvostelurunko
Nimi: The Market Court
Kansallinen rekisterinumero: 3006157-6
Postiosoite: Radanrakentajantie 5
Postinumero: 00520
Postitoimipaikka: Helsinki
Alue: Helsinki-Uusimaa🏙️
Maa: Suomi 🇫🇮
Sähköposti: markkinaoikeus@oikeus.fi📧
Puhelin: +358 295643300📞
URL: http://www.oikeus.fi/markkinaoikeus🌏 Palvelu, josta voi saada tietoja uudelleentarkastelumenettelystä Sama kuin: Nimi ja osoitteet Uudelleentarkastelumenettely
Tarkat tiedot uudelleentarkastelumenettelyjen määräajasta (määräajoista):
The appeal must be made in writing within 14 days after the Tenderer has received notification about the decision regarding the procurement with the appeal instructions. The appeal period begins on the day following the date of notification. The date of service is therefore not included in the appeal period. An appeal to the Finnish market court must be filed no later than six (6) months after the procurement decision was made in the event that the Tenderer has received information about the procurement decision with the notice of appeal and the procurement decision or notice of appeal has been substantially incomplete.
Tarkat tiedot uudelleentarkastelumenettelyjen määräajasta (määräajoista)
The appeal must be made in writing within 14 days after the Tenderer has received notification about the decision regarding the procurement with the appeal instructions. The appeal period begins on the day following the date of notification. The date of service is therefore not included in the appeal period. An appeal to the Finnish market court must be filed no later than six (6) months after the procurement decision was made in the event that the Tenderer has received information about the procurement decision with the notice of appeal and the procurement decision or notice of appeal has been substantially incomplete.