Kohde Hankinnan laajuus
Otsikko: Procurement for Heat Pump Unit for Helen Ltd Vuosaari Power Plant
181204
Tuotteet/palvelut: Kompressorit📦
Lyhyt kuvaus:
“The scope of supply is one (1) heat pump unit equipped with one or 2 turbo compressor and with minimum of 9,5 MW cooling capacity.”
1️⃣
Lisätuotteet/palvelut: Kompressorit📦
Suorituspaikka: Helsinki-Uusimaa🏙️
Hankinnan kuvaus:
“The scope of supply is one (1) heat pump unit equipped with one or 2 turbo compressor and with minimum of 9,5 MW cooling capacity. Refrigerant R1234ze. The...”
Hankinnan kuvaus
The scope of supply is one (1) heat pump unit equipped with one or 2 turbo compressor and with minimum of 9,5 MW cooling capacity. Refrigerant R1234ze. The heat pump must be designed with the values described below: Cooling capacity (winter) 9,5 MW, District heating water out (max) 82 C, District heating water in 43 C, Intermediate/evaporator circuit temperatures (winter) 24 C /18 C, Intermediate/evaporator circuit temperatures (summer) 8C /3 C, ΔTmin in district heating circuit 22 C. The heat pump shall be designed with the possibility to use the sea water as the heat source during the time when the power plants are offline (seawater runs in its own circuit). The heat pump shall be designed with the possibility of minimum cooling capacity 9,5 MW when the outlet temperature in district heating circuit is 65 C.
Condenser: Required heating capacity 11-15 MW. Tube material carbon steel.
Evaporator: Required cooling capacity minimum 9,5 MW. Tube material carbon steel. Maximum dimensions of the heat pump unit: 12 m x 6 m x 5 m (length x width x height). Supply voltage 6kV or 10 kV for the electric motor (will be determined in negotiations later). The control range of the heat pump shall be 30-100 %. Cooling COP minimum 3,5 and heating COP minimum 4 when district heating water out is 65 C. Maximum allowable power supply for heat pump 3,8 MVA. The tender candidate must present references of previous deliveries similar to this procurement. The scope of supply must be fully completed with test runs done by summer 2022. The schedule will be defined more closely at the later stage of the bidding competition.
Availability of service: the supplier must be able to have an independent service at the heat pump station no later than within 48 hours after receiving a call from the client. This is essential from the standpoint of minimizing losses due to the production shutdown. The heat pump shall be designed in accordance with the EN standards and pressure equipment directive requirements. The heat pump unit in the scope of this procurement is one technical entity which cannot be divided into lots.
Näytä lisää Myöntämisperusteet
Hinta ei ole ainoa myöntämisperuste, ja kaikki perusteet ilmoitetaan ainoastaan hankinta-asiakirjoissa
Sopimuksen, puitesopimuksen tai dynaamisen hankintajärjestelmän kesto
Jäljempänä oleva aikataulu on ilmaistu kuukausina.
Kuvaus
Kesto: 36
Tietoa vaihtoehdoista
Vaihtoehdot ✅
Vaihtoehtojen kuvaus:
“Critical spare parts for the use of 10 years and operational spare parts for the use of 2 years. One filling of the refrigerant for the heat pump.”
Oikeudelliset, taloudelliset, rahoitukselliset ja tekniset tiedot Osallistumisehdot
Luettelo ja lyhyt kuvaus olosuhteista:
“The supplier shall, before the agreement is signed, give following valid documents (no older than 3 months) in Finnish or in English:
1) Extract from the...”
Luettelo ja lyhyt kuvaus olosuhteista
The supplier shall, before the agreement is signed, give following valid documents (no older than 3 months) in Finnish or in English:
1) Extract from the trade register or relevant verification according to the tenderer's local legislation. 2) A certificate of taxes paid from the supplier's local tax authority or an account that a payment agreement has been made on overdue tax payments;
3) Certificates of pension insurance and payment of pension insurance premiums or an account that a payment agreement has been made on overdue pension payments;
4) A description of the collective agreement used;
5) Copy of the occupational injury insurance;
6) A description of occupational health care. (See websites: https://www.tilaajavastuu.fi/en/act-on-the-contractors-obligations-and-liability-when-work-is-contracted-out/) The supplier shall comply with the provisions of the Act on Posting Workers (447/2016). IF there were posted workers, the supplier shall set (before signing the contract) a representative in Finland, who shall have an address in Finland and who speaks Finnish. The supplier shall deliver (before singing the contract) among others certificates of accident and pension insurances of the posted workers working at the purchaser's site in Finland.
Näytä lisää Taloudellinen ja rahoituksellinen asema
Luettelo ja lyhyt kuvaus valintaperusteista:
“The tenderer candidate shall have sufficient economical and financial conditions to accomplish the project described in this EU announcement. The tenderer...”
Luettelo ja lyhyt kuvaus valintaperusteista
The tenderer candidate shall have sufficient economical and financial conditions to accomplish the project described in this EU announcement. The tenderer candidate shall have rating class according to Suomen Asiakastieto Oy (if available) at least A+ or it will be considered same according to financial statement analysis of last two (2) fiscal period. The tenderer candidate who has rating C or similar according to financial statement analysis shall be disqualified. The tenderer candidate who has rating A or B or similar according to financial statement analysis may be disqualified. The tenderer candidate shall have liability insurance. See ‘Other terms of the call for tenders’.
Näytä lisää Tekninen ja ammatillinen pätevyys
Luettelo ja lyhyt kuvaus valintaperusteista: See Tarjouspalvelu.fi
Osallistumisehdot
Luettelo ja lyhyt kuvaus säännöistä ja kriteereistä: See Tarjouspalvelu.fi
Vaadittavat vakuudet ja takuut: See Tarjouspalvelu.fi
Tärkeimmät rahoitusehdot ja maksujärjestelyt ja/tai viittaus niitä koskeviin säännöksiin: See Tarjouspalvelu.fi
Oikeudellinen muoto, joka sen taloudellisten toimijoiden ryhmittymän, jonka kanssa hankintasopimus tehdään, on otettava:
“In a case that a tenderer candidate is participating as a consortium, the tenderer must establish that the requirements concerning economical and financial...”
Oikeudellinen muoto, joka sen taloudellisten toimijoiden ryhmittymän, jonka kanssa hankintasopimus tehdään, on otettava
In a case that a tenderer candidate is participating as a consortium, the tenderer must establish that the requirements concerning economical and financial situation, technical capacity, professional competency as well as the other requirements provided on this announcement are fulfilled. Furthermore, the tenderer candidate is required to clarify the relationships between the consortium parties, nominate the consortium party responsible for management and to specify the responsibilities between the consortium parties in carrying out the contract.
Näytä lisää Sopimukseen liittyvät ehdot
Sopimuksen täytäntöönpanoehdot:
“The supplier shall, before the agreement is signed, give valid documentation according to III.1.1 and an Extract from Criminal Records.”
Menettely Toimenpiteen tyyppi
Neuvottelumenettely, johon liittyy edeltävä kilpailuttaminen
Tiedot ratkaisujen tai tarjousten määrän vähentämisestä neuvottelujen tai vuoropuhelun aikana
Vaiheittaisen menettelyn käyttäminen, jotta vähitellen voidaan vähentää keskusteltavien ratkaisujen tai neuvoteltavien tarjousten määrää
Hallinnolliset tiedot
Tarjousten tai osallistumishakemusten vastaanottamisen määräaika: 2019-06-28
23:30 📅
Kielet, joilla tarjoukset tai osallistumishakemukset voidaan jättää: englanti 🗣️
Kielet, joilla tarjoukset tai osallistumishakemukset voidaan jättää: suomi 🗣️
Täydentävät tiedot Tietoa sähköisistä työnkuluista
Sähköistä tilaamista käytetään
Sähköinen laskutus hyväksytään
Sähköistä maksua käytetään
Arvostelurunko
Nimi: Markkinaoikeus
Postiosoite: Radanrakentajantie 5
Postitoimipaikka: Helsinki
Postinumero: 00520
Maa: Suomi 🇫🇮
Puhelin: +358 295643300📞
Sähköposti: markkinaoikeus@oikeus.fi📧
Faksi: +358 295643314 📠
URL: http://www.oikeus.fi/markkinaoikeus🌏 Palvelu, josta voi saada tietoja uudelleentarkastelumenettelystä
Nimi: Helen Ltd
Postitoimipaikka: Helen
Maa: Suomi 🇫🇮
Sähköposti: helen@helen.fi📧
URL: http://www.helen.fi🌏
Lähde: OJS 2019/S 113-278507 (2019-06-13)
Ilmoitus tehdystä sopimuksesta (2020-02-25) Kohde Hankinnan laajuus
Otsikko: Procurement for Heat Pump Unit for Helen Ltd Vuosaari Power Plant
43323
Lyhyt kuvaus:
“The scope of supply is 1 heat pump unit equipped with one or 2 turbo compressor and with minimum of 9,5 MW cooling capacity.”
Hankinnan kokonaisarvo (ilman arvonlisäveroa): EUR 4 962 624 💰
Kuvaus
Hankinnan kuvaus:
“The scope of supply is 1 heat pump unit equipped with 1 or 2 turbo compressor and with minimum of 9,5 MW cooling capacity.
Refrigerant R1234ze.
The heat...”
Hankinnan kuvaus
The scope of supply is 1 heat pump unit equipped with 1 or 2 turbo compressor and with minimum of 9,5 MW cooling capacity.
Refrigerant R1234ze.
The heat pump must be designed with the values described below:
Cooling capacity (winter) 9,5 MW,
District heating water out (max) 82 C,
District heating water in 43 C,
Intermediate/evaporator circuit temperatures (winter) 24 C/18 C,
Intermediate/evaporator circuit temperatures (summer) 8 C/3 C,
ΔTmin in district heating circuit 22 C.
The heat pump shall be designed with the possibility to use the sea water as the heat source during the time when the power plants are offline (seawater runs in its own circuit).
The heat pump shall be designed with the possibility of minimum cooling capacity 9,5 MW when the outlet temperature in district heating circuit is 65 C.
Condenser:
Required heating capacity 11-15 MW.
Tube material carbon steel.
Evaporator:
Required cooling capacity minimum 9,5 MW.
Tube material carbon steel.
Maximum dimensions of the heat pump unit: 12 m x 6 m x 5 m (length x width x height).
Supply voltage 6 kV or 10 kV for the electric motor (will be determined in negotiations later).
The control range of the heat pump shall be 30 — 100 %.
Cooling COP minimum 3,5 and heating COP minimum 4 when district heating water out is 65 C.
Maximum allowable power supply for heat pump 3,8 MVA.
Näytä lisää Myöntämisperusteet
Laatukriteeri (nimi): Quality
Laatukriteeri (painotus): 40
Hinta (painotus): 60
Tietoa vaihtoehdoista
Vaihtoehtojen kuvaus:
“Critical spare parts for the use of 10 years and operational spare parts for the use of 2 years.
One filling of the refrigerant for the heat pump.”
Menettely Hallinnolliset tiedot
Tätä menettelyä koskeva aiempi julkaisu: 2019/S 113-278507
Sopimuksen tekeminen
1️⃣
Otsikko: Procurement for Heat Pump Unit for Helen Ltd Vuosaari Power Plant
Sopimuksen tekopäivä: 2020-02-03 📅
Toimeksisaajan nimi ja osoite
Nimi: Friotherm AG
Kansallinen rekisterinumero: 106.094.419
Postiosoite: Langfeldstrasse 104
Postitoimipaikka: Frauenfeld
Postinumero: 8500
Maa: Sveitsi 🇨🇭
Alue: Schweiz/Suisse/Svizzera 🏙️
Toimeksisaaja on pk-yritys ✅
Lähde: OJS 2020/S 041-097748 (2020-02-25)