Aalto University School of Chemical Engineering, department of bioproducts and biosystems and department of chemical and metallurgical engineering are conducting research on separation technology. We are seeking a skid mounted pilot-scale Falling Film Evaporator (FFE) for the continuous concentration of a feed stream of 35-60 kg/h by evaporating water, and a skid mounted pilot-scale agitated thin film (wiped film) evaporator (ATFE) for the continuous concentration of a feed stream of 5-25 kg/h by evaporating water. The object of the contract is divided into the following two lots: 1 falling film evaporator (FFE) 2 agitated thin film evaporator (ATFE) Tenderers may opt to tender either only one of the 2 aforementioned lots or both lots. Please see separate documents for further information and terms and conditions (as attachment files at the Hanki / Tarjouspalvelu Service at https://www.hanki-palvelu.fi/en/).
Määräaika
Tarjousten vastaanottamisen määräaika oli 2019-08-20.
Hankinta julkaistiin 2019-06-10.
Kohde Hankinnan laajuus
Otsikko:
“Pilot Plant Setup of Falling Film Evaporator and Agitated thin Film Evaporator
D/230/01.01.04.00/2019”
Tuotteet/palvelut: Laboratoriolaitteet, optiset ja tarkkuuslaitteet (lukuun ottamatta silmälaseja)📦
Lyhyt kuvaus:
“Aalto University School of Chemical Engineering, department of bioproducts and biosystems and department of chemical and metallurgical engineering are...”
Lyhyt kuvaus
Aalto University School of Chemical Engineering, department of bioproducts and biosystems and department of chemical and metallurgical engineering are conducting research on separation technology. We are seeking a skid mounted pilot-scale Falling Film Evaporator (FFE) for the continuous concentration of a feed stream of 35-60 kg/h by evaporating water, and a skid mounted pilot-scale agitated thin film (wiped film) evaporator (ATFE) for the continuous concentration of a feed stream of 5-25 kg/h by evaporating water. The object of the contract is divided into the following two lots: 1 falling film evaporator (FFE) 2 agitated thin film evaporator (ATFE) Tenderers may opt to tender either only one of the 2 aforementioned lots or both lots. Please see separate documents for further information and terms and conditions (as attachment files at the Hanki / Tarjouspalvelu Service at https://www.hanki-palvelu.fi/en/).
Näytä lisää Tietoa eristä
Tarjouksia voidaan jättää kaikista eristä
Hankinnan laajuus
Hankintaviranomainen pidättää itsellään oikeuden tehdä hankintasopimuksia, joissa yhdistyvät seuraavat erät tai eräryhmät: 1 falling film evaporator (FFE) 2 agitated thin film evaporator (ATFE).
1️⃣ Hankinnan laajuus
Otsikko: Falling Film Evaporator
Otsikko
Erän tunnistenumero: 1
Kuvaus
Lisätuotteet/palvelut: Laboratoriolaitteet, optiset ja tarkkuuslaitteet (lukuun ottamatta silmälaseja)📦
Suorituspaikka: Helsinki-Uusimaa🏙️
Hankinnan kuvaus:
“Aalto University School of Chemical Engineering, department of bioproducts and biosystems and department of chemical and metallurgical engineering are...”
Hankinnan kuvaus
Aalto University School of Chemical Engineering, department of bioproducts and biosystems and department of chemical and metallurgical engineering are conducting research on separation technology. We are seeking a skid mounted pilot-scale Falling Film Evaporator (FFE) for the continuous concentration of a feed stream of 35-60 kg/h by evaporating water. Note: Obtaining the Definition of Requirements (Annexes 2-4) requires signing an NDU (Annex 1) The deadline for submitting the NDU is 11.7.2019. Further instructions can be found on the invitation to tender. Only tenders from tenderers who have submitted the signed NDU will be taken into account. Please see separate documents for further information and terms and conditions (as attachment files at the Hanki /Tarjouspalvelu Service at https://www.hanki-palvelu.fi/en/).
Näytä lisää Myöntämisperusteet
Hinta
Sopimuksen, puitesopimuksen tai dynaamisen hankintajärjestelmän kesto
Jäljempänä oleva aikataulu on ilmaistu kuukausina.
Kuvaus
Kesto: 12
2️⃣ Hankinnan laajuus
Otsikko: Agitated thin Film Evaporator
Otsikko
Erän tunnistenumero: 2
Kuvaus
Hankinnan kuvaus:
“Aalto University School of Chemical Engineering, Department of bioproducts and biosystems and department of chemical and metallurgical engineering are...”
Hankinnan kuvaus
Aalto University School of Chemical Engineering, Department of bioproducts and biosystems and department of chemical and metallurgical engineering are conducting research on separation technology. We are seeking a skid mounted pilot-scale agitated thin film (wiped film) evaporator (ATFE) for the continuous concentration of a feed stream of 5-25 kg/h by evaporating water. Note: Obtaining the Definition of Requirements (Annexes 2-4) requires signing an NDU (Annex 1). The deadline for submitting the NDU is 11.7.2019. Further instructions can be found on the invitation to tender. Only tenders from tenderers who have submitted the signed NDU will be taken into account. Please see separate documents for further information and terms and conditions (as attachment files at the Hanki/ Tarjouspalvelu Service at https://www.hanki-palvelu.fi/en/).
Menettely Toimenpiteen tyyppi
Avoin menettely
Hallinnolliset tiedot
Tarjousten tai osallistumishakemusten vastaanottamisen määräaika: 2019-08-20
12:00 📅
Kielet, joilla tarjoukset tai osallistumishakemukset voidaan jättää: englanti 🗣️
Jäljempänä oleva aikataulu on ilmaistu kuukausina.
Vähimmäisaika, jonka kuluessa tarjoajan on pidettävä tarjous voimassa: 3
Tarjousten avaamista koskevat ehdot: 2019-08-20
12:01 📅
Täydentävät tiedot Lisätietoja
“Note: Obtaining the Definition of Requirements (Annexes 2-4) requires signing an NDU (Annex 1) The deadline for submitting the NDU is 11.7.2019. Further...”
Note: Obtaining the Definition of Requirements (Annexes 2-4) requires signing an NDU (Annex 1) The deadline for submitting the NDU is 11.7.2019. Further instructions can be found on the Invitation to tender. Only tenders from tenderers who have submitted the signed NDU will be taken into account. Please see separate documents for further information and terms and conditions (as attachment files at the Hanki/Tarjouspalvelu Service at https://www.hanki-palvelu.fi/en/).
Ilmoitus tehdystä sopimuksesta (2020-01-23) Oikeudelliset, taloudelliset, rahoitukselliset ja tekniset tiedot Oikeusperusta
Kuvaus: Foundation-based university
Kohde Hankinnan laajuus
Otsikko:
“Notice of Suspension: Pilot Plant setup of Falling Film Evaporator and Agitated Thin Film Evaporator”
Lyhyt kuvaus:
“Aalto University School of Chemical Engineering, Department of Bioproducts and Biosystems and Department of Chemical and Metallurgical Engineering are...”
Lyhyt kuvaus
Aalto University School of Chemical Engineering, Department of Bioproducts and Biosystems and Department of Chemical and Metallurgical Engineering are conducting research on separation technology. We are seeking a skid mounted pilot-scale falling film evaporator (FFE) for the continuous concentration of a feed stream of 35-60 kg/h by evaporating water, and a skid mounted pilot-scale agitated thin film (wiped film) evaporator (ATFE) for the continuous concentration of a feed stream of 5-25 kg/h by evaporating water.
The object of the contract is divided into the following 2 lots:
1) Falling film evaporator (FFE);
2) Agitated thin film evaporator (ATFE).
Tenderers may opt to tender either only one of the 2 aforementioned lots or both lots.
Please see separate documents for further information and terms and conditions (as attachment files at the Hanki/Tarjouspalvelu Service at https://www.hanki-palvelu.fi/en/).
Näytä lisää Tietoa eristä
Tämä sopimus on jaettu osiin ✅ Kuvaus
Hankinnan kuvaus:
“Aalto University School of Chemical Engineering, Department of Bioproducts and Biosystems and Department of Chemical and Metallurgical Engineering are...”
Hankinnan kuvaus
Aalto University School of Chemical Engineering, Department of Bioproducts and Biosystems and Department of Chemical and Metallurgical Engineering are conducting research on separation technology. We are seeking a skid mounted pilot-scale falling film evaporator (FFE) for the continuous concentration of a feed stream of 35-60 kg/h by evaporating water.
Note: obtaining the Definition of Requirements (Annexes 2-4) requires signing an NDU (Annex 1). The deadline for submitting the NDU is 11.7.2019. Further instructions can be found on the Invitation to tender. Only tenders from tenderers who have submitted the signed NDU will be taken into account.
Please see separate documents for further information and terms and conditions (as attachment files at the Hanki / Tarjouspalvelu Service at https://www.hanki-palvelu.fi/en/).
Näytä lisää Hankinnan laajuus
Otsikko: Agitated Thin Film Evaporator
Kuvaus
Hankinnan kuvaus:
“Aalto University School of Chemical Engineering, Department of Bioproducts and Biosystems and Department of Chemical and Metallurgical Engineering are...”
Hankinnan kuvaus
Aalto University School of Chemical Engineering, Department of Bioproducts and Biosystems and Department of Chemical and Metallurgical Engineering are conducting research on separation technology. We are seeking a skid mounted pilot-scale agitated thin film (wiped film) evaporator (ATFE) for the continuous concentration of a feed stream of 5-25 kg/h by evaporating water.
Note: obtaining the Definition of Requirements (Annexes 2-4) requires signing an NDU (Annex 1). The deadline for submitting the NDU is 11.7.2019. Further instructions can be found on the invitation to tender. Only tenders from tenderers who have submitted the signed NDU will be taken into account.
Please see separate documents for further information and terms and conditions (as attachment files at the Hanki/Tarjouspalvelu Service at https://www.hanki-palvelu.fi/en/).
Menettely Hallinnolliset tiedot
Tätä menettelyä koskeva aiempi julkaisu: 2019/S 111-271457
Sopimuksen tekeminen
1️⃣
Erän tunnistenumero: 1
Tiedot muista kuin palkintorahoista
Muut syyt (menettelyn lopettaminen)
2️⃣
Erän tunnistenumero: 2
Täydentävät tiedot Lisätietoja
“Grounds for suspension:
The contracting entity has not received any acceptable tenders due to the strict delivery time required.”
Lähde: OJS 2020/S 017-036405 (2020-01-23)