Yleisradio Oy invites you to tender for Wireless microphones and IEM equipment. The tender contains six different categories. Yle selects three winner tenderers for each category. Yle wishes to receive tenders in all categories, but partial tenders are also accepted. The requirements and objectives concerning of the offered Wireless microphones and IEM equipment, the tenderer and the offered services for submitting the tender are described with details in appendices: Appendix 1 Technical Requirements Appendix 2 Sopimus (Purchase agreement) Appendix 3 Julkisten hankintojen yleiset sopimusehdot (JYSE 2014 Tavarat) (General Terms of Public Procurement in Supply Contracts (JYSE 2014 Supplies)).
Määräaika
Tarjousten vastaanottamisen määräaika oli 2017-11-23.
Hankinta julkaistiin 2017-10-13.
Toimittajat
Seuraavat toimittajat mainitaan hankintapäätöksissä tai muissa hankinta-asiakirjoissa:
hankintailmoitus (2017-10-13) Kohde Hankinnan laajuus
Otsikko: Mikrofonit
Viitenumero: YLE20170027
Lyhyt kuvaus:
Yleisradio Oy invites you to tender for Wireless microphones and IEM equipment.
The tender contains six different categories. Yle selects three winner tenderers for each category. Yle wishes to receive tenders in all categories, but partial tenders are also accepted.
The requirements and objectives concerning of the offered Wireless microphones and IEM equipment, the tenderer and the offered services for submitting the tender are described with details in appendices:
Appendix 1 Technical Requirements
Appendix 2 Sopimus (Purchase agreement)
Appendix 3 Julkisten hankintojen yleiset sopimusehdot (JYSE 2014 Tavarat) (General Terms of Public Procurement in Supply Contracts (JYSE 2014 Supplies)).
Yleisradio Oy invites you to tender for Wireless microphones and IEM equipment.
The tender contains six different categories. Yle selects three winner tenderers for each category. Yle wishes to receive tenders in all categories, but partial tenders are also accepted.
The requirements and objectives concerning of the offered Wireless microphones and IEM equipment, the tenderer and the offered services for submitting the tender are described with details in appendices:
Appendix 1 Technical Requirements
Appendix 2 Sopimus (Purchase agreement)
Appendix 3 Julkisten hankintojen yleiset sopimusehdot (JYSE 2014 Tavarat) (General Terms of Public Procurement in Supply Contracts (JYSE 2014 Supplies)).
Ilmoituksen metatiedot
Alkukieli: englanti 🗣️
Asiakirjatyyppi: hankintailmoitus
Sopimuksen luonne: Tavarat
Asetus: Euroopan unioni
Yhteinen hankintanimikkeistö (CPV)
Koodi: Mikrofonit📦
Lisä-CPV-koodi: Mikrofonit ja kaiuttimet📦 Suorituspaikka
NUTS-alue: Manner-Suomi
🏙️
Menettely
Menettelyn tyyppi: Avoin menettely
Tarjouksen tyyppi: Tarjous koskee kaikkia eriä
Myöntämisperusteet
Kokonaistaloudellisesti edullisin tarjous
Yle will require the ESPD form to be completed by each candidate and their subcontractors, and each operator, if the proposal is made by a group of tenderers. Please see following information — and the links attached in the eTendering Tool, on page ‘The entire call for tenders and attachments’.
Yle will require the ESPD form to be completed by each candidate and their subcontractors, and each operator, if the proposal is made by a group of tenderers. Please see following information — and the links attached in the eTendering Tool, on page ‘The entire call for tenders and attachments’.
Kohde Hankinnan laajuus
Lyhyt kuvaus:
Yleisradio Oy invites you to tender for Wireless microphones and IEM equipment.
The tender contains six different categories. Yle selects three winner tenderers for each category. Yle wishes to receive tenders in all categories, but partial tenders are also accepted.
The requirements and objectives concerning of the offered Wireless microphones and IEM equipment, the tenderer and the offered services for submitting the tender are described with details in appendices:
Appendix 1 Technical Requirements
Appendix 2 Sopimus (Purchase agreement)
Appendix 3 Julkisten hankintojen yleiset sopimusehdot (JYSE 2014 Tavarat) (General Terms of Public Procurement in Supply Contracts (JYSE 2014 Supplies)).
Arvioitu kokonaisarvo: 240 000 EUR 💰
Osan nimi: Heavy digital studio and OB equipment (1)
Osan numero: 1
Lyhyt kuvaus:
The Category 1 equipment is typically used in large scale studio and OB productions. System must be fully digital; the radio transmission must be based on digital modulation.
Kesto: 48 kuukautta
Lisätietoja:
Yle will require the ESPD form to be completed by each candidate and their subcontractors, and each operator, if the proposal is made by a group of tenderers. Please see following information — and the links attached in the eTendering Tool, on page ‘The entire call for tenders and attachments’.
Yle will require the ESPD form to be completed by each candidate and their subcontractors, and each operator, if the proposal is made by a group of tenderers. Please see following information — and the links attached in the eTendering Tool, on page ‘The entire call for tenders and attachments’.
Osan nimi: Heavy analog studio and OB equipment (2)
Osan numero: 2
Lyhyt kuvaus:
The Category 2 equipment is typically used in large scale studio and OB productions. The RF system must be analog; the radio transmission must be based on FM modulation.
Osan nimi: Light studio and OB equipment (3)
Osan numero: 3
Lyhyt kuvaus:
The Category 3 equipment is typically used in small scale studio and OB productions.
Osan nimi: Heavy ENG equipment (4)
Osan numero: 4
Lyhyt kuvaus:
The Category 4 equipment is typically used with 1-camera operation for news and document type of productions. At the moment Yle is using Panasonic P2 800/3000/3100/5000 models.
Osan nimi: Light ENG equipment (5)
Osan numero: 5
Lyhyt kuvaus:
The Category 5 equipment is typically used with small handheld cameras. At the moment Yle is using e.g. Panasonic P2 250/270 series and Sony FS7.
Osan nimi: IEM equipment (6)
Osan numero: 6
Lyhyt kuvaus:
The Category 6 refers to IEM equipment used typically with Categories 1 and 2 systems.
Oikeudelliset, taloudelliset, rahoitukselliset ja tekniset tiedot Osallistumisehdot
Kelpoisuus harjoittaa ammattitoimintaa:
The tenderer shall be registered in the professional or trade register of its domicile country, if the tenderer is obligated to register to these registers according to its domicile country's national law.
If later requested, the tenderer shall provide relevant certificates (company registration document).
If the tenderer is a group, these requirements shall be met by all its members individually.
If the tenderer uses subcontractors, these requirements shall be met by each subcontractor individually.
Taloudellinen ja rahoituksellinen asema:
The tenderer's economic standing and financial solvency shall be sufficiently stable to provide the customer with the services including the contract. Please see the requirements set in the ESPD form (and below).
It the participant is a group, the requirements shall be met by all its members individually — except the required turn over, which can be met by summing together the turn overs of all the members of the group.
If the participant chooses to meet the mandatory requirements set to the tenderer by relying on the capacities on other entities (f.e subcontractors) these requirements shall be met by each entity individually.
If requested, the tenderer shall provide relevant certificates.
Vähimmäistaso(t):
The tenderer's financial preconditions are sufficient in comparison with the scale of the procurement defined in invitation documents.
Sufficient Credit Rating: The tenderer must have a minimum credit rating (credit worthiness) A, according to credit rating system from AAA, the highest, to C, the lowest, rated by well known and established credit rating agency. If the tenderer rating cannot be found, the tenderer's situation will be evaluated through the last 3 audited financial statements and/or another similar statement.
Sufficient Credit Rating: The tenderer must have a minimum credit rating (credit worthiness) A, according to credit rating system from AAA, the highest, to C, the lowest, rated by well known and established credit rating agency. If the tenderer rating cannot be found, the tenderer's situation will be evaluated through the last 3 audited financial statements and/or another similar statement.
Tekninen ja ammatillinen pätevyys:
It the tenderer is a group, the requirements shall be met by all its members individually — except the required turn over, which can be met by summing together the turn overs of all the members of the group.
If the tenderer chooses to meet the mandatory requirements set to the candidates by relying on the capacities on other entities (f.e subcontractors) these requirements shall be met by each entity individually.
If requested, the tenderer shall provide relevant certificates.
Vähimmäistaso(t):
Tenderer must have references of selling equipments and producing similar kinds of services. At least three (3) references are required. The references must be from past three years.
Please list three reference from within the past three years. The customer needs to be able to verify the provided reference. Unspecified reference will not be considered as proof of suitability. Please see the requirements set in the ESPD form.
Sopimuksen toteuttaminen
Sopimuksen täytäntöönpanoehdot:
Contract performance conditions are defined in the appended Purchase agreement (Appendix 2. Sopimus), which the tenderer must accept as such.
Menettely
Harkittavien osallistujien määrä: 3
Tarjousten vastaanottoaika: 12:00
Kielet, joilla tarjoukset tai osallistumishakemukset voidaan jättää: englanti 🗣️
suomi 🗣️
Tarjouksen voimassaoloaika: 6 kuukautta
Tarjousten avauspäivä: 2017-11-23 📅
Tarjousten avausaika: 12:15
Lisätietoja: The opening of tenders is not public.
Viite Lisätietoja
Arvioitu aikataulu seuraavien ilmoitusten julkaisemiselle: The estimated timing for further notices to is not known.
Ll times given in the invitation to tender are in Finnish time (EET = Eastern European Time UTC +2) or, during daylight saving time, in Finnish daylight saving time (EEST = Eastern European Summer Time UTC +3). The summer time starts on 26 March and ends on 29 October.
Ll times given in the invitation to tender are in Finnish time (EET = Eastern European Time UTC +2) or, during daylight saving time, in Finnish daylight saving time (EEST = Eastern European Summer Time UTC +3). The summer time starts on 26 March and ends on 29 October.
Please note that the online connection to the eTendering supplier portal is periodically slow and the download time will take time. Please fill out the tenders information in good time before the deadline expires.
Ilmoitus tehdystä sopimuksesta (2018-04-20) Kohde Hankinnan laajuus
Lyhyt kuvaus:
The object of procurement was Wireless microphones and IEM equipment. Call for tender was contained 6 different categories. Yle selected 3 winner suppliers for each category.
Hankinnan kokonaisarvo: 240 000 EUR 💰
Ilmoituksen metatiedot
Asiakirjatyyppi: Ilmoitus tehdystä sopimuksesta
Asetus: Euroopan unioni ja WTO-maat
Kohde Hankinnan laajuus
Osan nimi: Heavy digital studio and OB equipment
Lyhyt kuvaus:
The Category 1 equipment is typically used in large scale studio and OB productions. System must be fully digital: the radio transmission must be based on digital modulation.
Osan nimi: Heavy analog studio and OB equipment
Lyhyt kuvaus:
The Category 2 equipment is typically used in large scale studio and OB productions. The RF system must be analog: the radio transmission must be based on FM modulation.
Osan nimi: Light studio and OB equipment
Heavy ENG equipment
Light ENG equipment
IEM equipment