The Finnish Border Guard (in Finnish Rajavartiolaitos, hereinafter referred to as "Contracting Authority"), on behalf of itself and of the Finnish National Police Board (in Finnish Poliisihallitus), requests tenders for providing initial verification and calibration verification services for evidential breath analyzers that are used for determining the presence of controlled substances in exhaled breath. The purpose of the procurement is to procure verification services to ensure accurate and reliable operation of the evidential breath analyzers in law enforcement use. The requirements and specifications for these services are detailed in this Call for tenders and its annexes.
This contract is divided into two lots:
1. Initial verification
2. Calibration verification
Tenders can concern either one of the lots or both lots.
The Contracting Authority is procuring initial verification and calibration verification services for approximately 240 evidential breath analyzers during the contract period. The model of the evidential breath analyzer is Intoxilyzer 9000 (hereinafter referred to as "Device") manufactured by CMI Inc. The technical details of the Device are presented in Annex 1.
The Contracting Authority estimates that each participating community will be procuring verification services to the following number of Devices:
The Finnish Border Guard - approx. 40 Devices
The Finnish National Police Board - approx. 200 Devices
The Finnish Border Guard is responsible for conducting the tendering competition regarding this procurement. The Finnish Border Guard and The Finnish National Police Board will sign their own contracts with the Service provider based on the contract award decision issued by The Finnish Border Guard.
Määräaika
Tarjousten vastaanottamisen määräaika oli 2021-09-09.
Hankinta julkaistiin 2021-08-04.
hankintailmoitus (2021-08-04) Hankintaviranomainen Nimi ja osoitteet
Nimi: The Finnish Border Guard
Kansallinen rekisterinumero: 0246003-5
Postiosoite: Vilhonvuorenkatu 6
Postitoimipaikka: Helsinki
Postinumero: 00500
Maa: Suomi 🇫🇮
Sähköposti: kilpailutukset@raja.fi📧
Alue: Suomi/Finland🏙️
URL: https://www.raja.fi🌏
Hankintaviranomainen (lisäksi)
Nimi: National Police Board of Finland
Kansallinen rekisterinumero: 2288666-6
Postiosoite: Vuorimiehentie 3
Postitoimipaikka: Espoo
Kohde Hankinnan laajuus
Otsikko:
“Initial verification and calibration verification for evidential breath analyzers
RVLDno-2021-1035”
Tuotteet/palvelut: Tekniset tarkastus- ja testauspalvelut📦
Lyhyt kuvaus:
“The Finnish Border Guard (in Finnish Rajavartiolaitos, hereinafter referred to as "Contracting Authority"), on behalf of itself and of the Finnish National...”
Lyhyt kuvaus
The Finnish Border Guard (in Finnish Rajavartiolaitos, hereinafter referred to as "Contracting Authority"), on behalf of itself and of the Finnish National Police Board (in Finnish Poliisihallitus), requests tenders for providing initial verification and calibration verification services for evidential breath analyzers that are used for determining the presence of controlled substances in exhaled breath. The purpose of the procurement is to procure verification services to ensure accurate and reliable operation of the evidential breath analyzers in law enforcement use. The requirements and specifications for these services are detailed in this Call for tenders and its annexes.
This contract is divided into two lots:
1. Initial verification
2. Calibration verification
Tenders can concern either one of the lots or both lots.
The Contracting Authority is procuring initial verification and calibration verification services for approximately 240 evidential breath analyzers during the contract period. The model of the evidential breath analyzer is Intoxilyzer 9000 (hereinafter referred to as "Device") manufactured by CMI Inc. The technical details of the Device are presented in Annex 1.
The Contracting Authority estimates that each participating community will be procuring verification services to the following number of Devices:
The Finnish Border Guard - approx. 40 Devices
The Finnish National Police Board - approx. 200 Devices
The Finnish Border Guard is responsible for conducting the tendering competition regarding this procurement. The Finnish Border Guard and The Finnish National Police Board will sign their own contracts with the Service provider based on the contract award decision issued by The Finnish Border Guard.
Näytä lisää Tietoa eristä
Tarjouksia voidaan jättää kaikista eristä
Evidential breath analyzers must not be put into service until their conformity and reliability have been verified. Verification of evidential breath analyzers before commissioning include checking the structure and operation of the device and comparing the measurement results with the maximum permissible inaccuracy limits.
The requirements for the initial verification service are specified in Call for tenders section "Procurement object criteria, General criteria of the sub-area".
Initial verification must be carried out by a neutral third party. Thus the Service provider shall be neutral and independent in regard to the manufacturer of the Device.
The Contracting Authority estimates that the first orders for initial verification service will be made without delay after the signing of the contract, and that the service need will be emphasized during the first three years of the contract.
Näytä lisää Myöntämisperusteet
Hinta
Sopimuksen, puitesopimuksen tai dynaamisen hankintajärjestelmän kesto
Jäljempänä oleva aikataulu on ilmaistu kuukausina.
Kuvaus
Kesto: 60
Lisätietoja:
“Duration of the contract: The contract shall become effective at its signature date and shall be valid for five (5) years.
The participating communities...”
Lisätietoja
Duration of the contract: The contract shall become effective at its signature date and shall be valid for five (5) years.
The participating communities will sign their own contracts with the Service provider.
2️⃣ Hankinnan laajuus
Otsikko: Lot 2: Calibration verification for evidential breath analyzers
Otsikko
Erän tunnistenumero: 2
Kuvaus
Hankinnan kuvaus:
“Evidential breath analyzers undergo annual maintenance at the Contracting Authority's maintenance service provider's premises in Sweden. After the annual...”
Hankinnan kuvaus
Evidential breath analyzers undergo annual maintenance at the Contracting Authority's maintenance service provider's premises in Sweden. After the annual maintenance, a calibration verification must be performed to the Device. The purpose of the calibration verification is to ensure the Device's accurate and reliable operation before returning it to service.
The requirements for the calibration verification service are specified in Call for tenders section "Procurement object criteria, General criteria of the sub-area".
Calibration verification must be carried out by a neutral third party. Thus the Service provider shall be neutral and independent in regard to the manufacturer of the Device.
The Contracting Authority estimates that the first orders for calibration verification service will be made during Q3-Q4 2022.
Näytä lisää Kesto
Aloituspäivä: 2021-10-01 📅
Kuvaus
Lisätietoja:
“Duration of the contract: Contract shall become effective at its signature date and shall be valid until further notice.
The starting date of the contract...”
Lisätietoja
Duration of the contract: Contract shall become effective at its signature date and shall be valid until further notice.
The starting date of the contract period is an estimate.
The participating communities will sign their own contracts with the Service provider.
Oikeudelliset, taloudelliset, rahoitukselliset ja tekniset tiedot Osallistumisehdot
Luettelo ja lyhyt kuvaus olosuhteista: See ESPD form.
Taloudellinen ja rahoituksellinen asema
Hankinta-asiakirjoissa mainitut valintaperusteet
Tekninen ja ammatillinen pätevyys
Hankinta-asiakirjoissa mainitut valintaperusteet
Menettely Toimenpiteen tyyppi
Avoin menettely
Hallinnolliset tiedot
Tarjousten tai osallistumishakemusten vastaanottamisen määräaika: 2021-09-09
12:00 📅
Kielet, joilla tarjoukset tai osallistumishakemukset voidaan jättää: englanti 🗣️
Jäljempänä oleva aikataulu on ilmaistu kuukausina.
Vähimmäisaika, jonka kuluessa tarjoajan on pidettävä tarjous voimassa: 6
Tarjousten avaamista koskevat ehdot: 2021-09-09
12:15 📅
Täydentävät tiedot Tietoa sähköisistä työnkuluista
Sähköinen laskutus hyväksytään
Arvostelurunko
Nimi: The Market Court
Postiosoite: Radanrakentajantie 5
Postitoimipaikka: Helsinki
Postinumero: 00520
Maa: Suomi 🇫🇮
Puhelin: +358 295643300📞
Sähköposti: markkinaoikeus@oikeus.fi📧
URL: https://www.markkinaoikeus.fi/🌏
Lähde: OJS 2021/S 152-404902 (2021-08-04)
Ilmoitus tehdystä sopimuksesta (2021-09-22) Kohde Hankinnan laajuus
Lyhyt kuvaus:
“The Finnish Border Guard, on behalf of itself and of the Finnish National Police Board, requested tenders for providing initial verification and calibration...”
Lyhyt kuvaus
The Finnish Border Guard, on behalf of itself and of the Finnish National Police Board, requested tenders for providing initial verification and calibration verification services for evidential breath analyzers that are used for determining the presence of controlled substances in exhaled breath.
The procurement was divided into two lots:
1. Initial verification
2. Calibration verification
Näytä lisää Tietoa eristä
Tämä sopimus on jaettu osiin ✅ Kuvaus
Hankinnan kuvaus:
“Evidential breath analyzers must not be put into service until their conformity and reliability have been verified. Verification of evidential breath...”
Hankinnan kuvaus
Evidential breath analyzers must not be put into service until their conformity and reliability have been verified. Verification of evidential breath analyzers before commissioning include checking the structure and operation of the device and comparing the measurement results with the maximum permissible inaccuracy limits.
Näytä lisää
Hankinnan kuvaus:
“Evidential breath analyzers undergo annual maintenance at the Contracting Authority's maintenance service provider's premises in Sweden. After the annual...”
Hankinnan kuvaus
Evidential breath analyzers undergo annual maintenance at the Contracting Authority's maintenance service provider's premises in Sweden. After the annual maintenance, a calibration verification must be performed to the Device. The purpose of the calibration verification is to ensure the Device's accurate and reliable operation before returning it to service.