Rolls-Royce 250 (C20B) engine and its LRU and SRU spare parts repair, overhaul and modification services. Frame Work Agreement for years 2017 — 2019. This procurement will be executed in accordance with the Finnish Act on Public Defence and Security Contracts (1531/2011). The procurement process is a restricted procedure with the publication of a contract notice (1531/2011 20 §). If more than three (3) acceptable Request to Participate is received, the number of the qualified tenderers will be limited to three based on the net sales figures (three biggest). Request to participate shall be sent to address: purchase5.fdflogcom@mil.fi and refer to number 20055509 also in the subject line. Failure to comply with any of the required requirements will lead to rejection of the participate. The Finnish Defence Forces Logistics Command is entitled, at its own discretion, to accept or reject the request to participate.
Määräaika
Tarjousten vastaanottamisen määräaika oli 2017-04-05.
Hankinta julkaistiin 2017-03-17.
Toimittajat
Seuraavat toimittajat mainitaan hankintapäätöksissä tai muissa hankinta-asiakirjoissa:
hankintailmoitus (2017-03-17) Kohde Hankinnan laajuus
Otsikko: Julkishallinnon palvelut, maanpuolustus ja sosiaaliturvapalvelut
Määrä tai laajuus: 1 050 000
Hankinnan kokonaisarvo: 1 050 000 💰
Ilmoituksen metatiedot
Alkukieli: englanti 🗣️
Asiakirjatyyppi: hankintailmoitus
Sopimuksen luonne: Palvelut
Asetus: Euroopan unioni
Yhteinen hankintanimikkeistö (CPV)
Koodi: Julkishallinnon palvelut, maanpuolustus ja sosiaaliturvapalvelut📦
Menettely
Menettelyn tyyppi: Nopeutettu rajoitettu menettely
Tarjouksen tyyppi: Tarjous koskee kaikkia eriä
Myöntämisperusteet
Kokonaistaloudellisesti edullisin tarjous
Hankintaviranomainen Tunnistetiedot
Maa: Suomi 🇫🇮
Hankintaviranomaisen tyyppi: Ei määritelty
Hankintaviranomaisen nimi: Puolustusvoimat
Postiosoite: PL 69
Postinumero: 33541
Postitoimipaikka: Tampere
Yhteystiedot
Sähköposti: purchase5.fdflogcom@mil.fi📧
Puhelin: +358 299800📞
The Participant shall fulfil the form ‘Request to Participate 20055509’.
The completed form shall be sent to: purchase5.fdflogcom@mil.fi
In the Request to Participate the Participant shall inform the contact details (incl. name of the point of contact) and reply for the following requests:
1. The quality management system and the operation of the Supplier shall fulfil at least the requirements of ISO 9001:2008 and AQAP 2110 Edition No 3 later versions. If the request for quotation will lead to a contract, the Supplier's performance shall be according to the requirements of the standards mentioned above.
2. The Supplier shall furnish proof of his technical and professional ability to perform the Contract:
— The Supplier shall have a written permit from the original manufacturer (Rolls-Royce RR250) to repair the engines, modules and equipment and shall be licensed according to RR250 AMROC.
— The Supplier shall list reference contracts (RR250 LRU repair, overhaul and modification services including test-rig and test-bench capabilities) together with the names of the contract parties.
3. The Supplier shall furnish proof of his economical ability to perform the Contract by announcing their net sales (turnover value) e.g. from the past 3 years.
Information: If more than three (3) acceptable Requests to Participate is received, the number of the qualified tenderers will be limited to 3 based on the net sales figures (3 biggest).
In case any additional information is required please contact e-mail address: purchase5.fdflogcom@mil.fi and refer to number 20055509 in the subject line.
In the Request to Participate the Participant shall inform the contact details (incl. name of the point of contact) and reply for the following requests:
1. The quality management system and the operation of the Supplier shall fulfil at least the requirements of ISO 9001:2008 and AQAP 2110 Edition No 3 later versions. If the request for quotation will lead to a contract, the Supplier's performance shall be according to the requirements of the standards mentioned above.
2. The Supplier shall furnish proof of his technical and professional ability to perform the Contract:
— The Supplier shall have a written permit from the original manufacturer (Rolls-Royce RR250) to repair the engines, modules and equipment and shall be licensed according to RR250 AMROC.
— The Supplier shall list reference contracts (RR250 LRU repair, overhaul and modification services including test-rig and test-bench capabilities) together with the names of the contract parties.
3. The Supplier shall furnish proof of his economical ability to perform the Contract by announcing their net sales (turnover value) e.g. from the past 3 years.
Information: If more than three (3) acceptable Requests to Participate is received, the number of the qualified tenderers will be limited to 3 based on the net sales figures (3 biggest).
In case any additional information is required please contact e-mail address: purchase5.fdflogcom@mil.fi and refer to number 20055509 in the subject line.
Kohde Hankinnan laajuus
Lyhyt kuvaus:
Rolls-Royce 250 (C20B) engine and its LRU and SRU spare parts repair, overhaul and modification services.
Frame Work Agreement for years 2017 — 2019.
This procurement will be executed in accordance with the Finnish Act on Public Defence and Security Contracts (1531/2011).
The procurement process is a restricted procedure with the publication of a contract notice (1531/2011 20 §).
If more than three (3) acceptable Request to Participate is received, the number of the qualified tenderers will be limited to three based on the net sales figures (three biggest).
Request to participate shall be sent to address: purchase5.fdflogcom@mil.fi and refer to number 20055509 also in the subject line.
Failure to comply with any of the required requirements will lead to rejection of the participate.
The Finnish Defence Forces Logistics Command is entitled, at its own discretion, to accept or reject the request to participate.
Oikeudelliset, taloudelliset, rahoitukselliset ja tekniset tiedot Osallistumisehdot
Kelpoisuus harjoittaa ammattitoimintaa: The Supplier shall commit to required requirements.
Taloudellinen ja rahoituksellinen asema:
The Participant shall furnish proof of his economical ability to perform the Contract by announcing their net sales (turnover value) e.g. from the past 3 years.
Information: If more than three (3) acceptable Requests to Participate are received, the number of the qualified tenderers will be limited to 3 based on the net sales figures (the 3 biggest).
The quality management system and the operation of the Supplier shall fulfil at least the requirements of ISO 9001:2008 and AQAP 2110 Edition No 3 later versions. If the request for quotation will lead to a contract, the Supplier's performance shall be according to the requirements of the standards mentioned above.
The quality management system and the operation of the Supplier shall fulfil at least the requirements of ISO 9001:2008 and AQAP 2110 Edition No 3 later versions. If the request for quotation will lead to a contract, the Supplier's performance shall be according to the requirements of the standards mentioned above.
Tekninen ja ammatillinen pätevyys:
References:
Participant shall furnish proof of his technical and professional ability to perform the Contract:
— The Supplier shall have a written permit from the original manufacturer (Rolls-Royce RR250) to repair the engines, modules and equipment and shall be licensed according to RR250 AMROC.
— The Supplier shall list reference contracts (RR250 LRU repair, overhaul and modification services including test-rig and test-bench capabilities) together with the names of the contract parties.
Menettely
Puitejärjestelyn kesto kuukausina: 36
Kielet
Kieli: englanti 🗣️
suomi 🗣️
Hankintaviranomainen Yhteystiedot
Yhteyspiste: Puolustusvoimien logistiikkalaitos
Contract Manager Minna Gustafsson
Viite Lisätietoja
The Participant shall fulfil the form ‘Request to Participate 20055509’.
In the Request to Participate the Participant shall inform the contact details (incl. name of the point of contact) and reply for the following requests:
1. The quality management system and the operation of the Supplier shall fulfil at least the requirements of ISO 9001:2008 and AQAP 2110 Edition No 3 later versions. If the request for quotation will lead to a contract, the Supplier's performance shall be according to the requirements of the standards mentioned above.
1. The quality management system and the operation of the Supplier shall fulfil at least the requirements of ISO 9001:2008 and AQAP 2110 Edition No 3 later versions. If the request for quotation will lead to a contract, the Supplier's performance shall be according to the requirements of the standards mentioned above.
2. The Supplier shall furnish proof of his technical and professional ability to perform the Contract:
— The Supplier shall have a written permit from the original manufacturer (Rolls-Royce RR250) to repair the engines, modules and equipment and shall be licensed according to RR250 AMROC.
— The Supplier shall list reference contracts (RR250 LRU repair, overhaul and modification services including test-rig and test-bench capabilities) together with the names of the contract parties.
3. The Supplier shall furnish proof of his economical ability to perform the Contract by announcing their net sales (turnover value) e.g. from the past 3 years.
Information: If more than three (3) acceptable Requests to Participate is received, the number of the qualified tenderers will be limited to 3 based on the net sales figures (3 biggest).
In case any additional information is required please contact e-mail address: purchase5.fdflogcom@mil.fi and refer to number 20055509 in the subject line.
Menettely Myöntämisperusteet
Kriteeri: 1. Price for overhaul of M250-C20B (30)
2. Price for overhaul + HMI of M250-C20B Turbine, overhaul + 1750FH inspection of M250-C20B Compressor (20)
3. M250-C20B Accessories' standard overhaul (5)
4. TAT (10)
5. Discount for M250-C20B Rolls-Royce/Aviall list prices (15)
6. M250-C20B Engine Test Cell rate (10)
7. Labour rate (10)